Front Mount Gate Bracket Installation - Ghost Controls DEP2 Installation And Owner's Manual

Hide thumbs Also See for DEP2:

Table of Contents

P U S H - T O - O P E N

STEP 12. Use the remote transmitter to fully retract the arm. The arm will stop on its own. The arm

in the fully retracted position will determine the CLOSED position of the gate.

NOTE

The arm has an internal limit switch that is fixed and is not adjustable.

TURN THE CONTROL BOX OFF

STEP 13. Attach front mount bracket to the operator. The gate must remain in the desired

closed position.

CLOSE THE GATE TO THE DESIRED CLOSED POSITION

A . Temporarily assemble the front mount of the gate by inserting the supplied 10mm x 40mm clevis pin, 10mm

I.D. nylon spacer, and clevis hairpin through the gate bracket.

NOTE

ALTERNATE TUBE GATE BRACKETS FOR MOUNTING TUBULAR GATES. (NOT FOR USE WITH FLAT PANEL

GATES) see below image. Tube brackets (AXTB) sold separately.

ARM FULLY

RETRACTED

Table of Contents

Need help?

Do you have a question about the DEP2 and is the answer not in the manual?