Windows 95 Drivers Setup Procedure; Windows Nt Drivers Setup Procedure - Advantech PCA-6154 User Manual

Half-size all-in-one pentium cpu card with vga and fast ethernet interface

Hide thumbs Also See for PCA-6154:

Table of Contents

5.4

Windows 95 Drivers Setup Procedure

1. Boot system with VGA or SuperVGA driver.

2. Select properties from a menu after right button press.

3. Select Display.

4. Select Change Display.

5. Select Change Monitor.

6. Select Change Adapter.

7. Select Have Disk.

5.5

Step 1

1. Install Windows NT as you normally would for a VGA display.

2. First click the Start button, choose Settings and click on the

Control Panel.

3. Choose the Display icon and click on the icon.

4. In the Display Properties window, click on the Settings tab.

5. Click on Change Display Type. In the Change Display Type

window, click on the Change button under Adapter Type. This

will bring up the Select Device window.

Step 2

1. In the Select Device window, click on the Other button. Enter

source directory where the Windows NT driver files are located.

2. Press <ENTER> and the name of the Chips and Technologies

Video Accelerator driver will appear at the end of Models list box.

Scroll to the end of the list box and double click on the driver.

3. Once the installation is complete, the system must be shut down

and restarted.

PCA-6154/6154L User's Manual

Table of Contents

Pca-6154l