Virus Warning; L1 & L2 Cache; Quick Power On Self Test; First/Second/Third/Other Boot Device - Advantech PCA-6186VE User Manual

3.4.1 Virus Warning

If enabled, a warning message and alarm beep activates if someone
attempts to write here. The commands are "Enabled" or "Disabled."
3.4.2 L1 & L2 Cache
Enabling this feature speeds up memory access. The commands are
"Enabled" or "Disabled."

3.4.3 Quick Power On Self Test

This option speeds up the Power-On Self Test (POST) conducted as soon
as the computer is turned on. When enabled, BIOS shortens or skips some
of the items during the test. When disabled, the computer conducts nor-
mal POST procedures.

3.4.4 First/Second/Third/Other Boot Device

The BIOS tries to load the OS with the devices in the sequence selected.
Choices are: Floppy, LS/ZIP, HDD, SCSI, CDROM, LAN, Disabled.

3.4.5 Swap Floppy Drive

Logical name assignments of floppy drives can be swapped if there is
more than one floppy drive. The commands are "Enabled" or "Disabled."

3.4.6 Boot UP Floppy Seek

Selection of the command "Disabled" will speed the boot up. Selection of
"Enabled" searches disk drives during boot up.

3.4.7 Boot Up NumLock Status

This feature selects the "power on" state for NumLock. The commands
are "Enabled" or "Disabled."

3.4.8 Gate A20 Option

Normal: A pin in keyboard controller controls GateA20
Fast (Default): Chipest controls GateA20.

3.4.9 Typematic Rate Setting

The typematic rate is the rate key strokes repeat as determined by the key-
board controller. The commands are "Enabled" or "Disabled." Enabling
allows the typematic rate and delay to be selected.

3.4.10 Typematic Rate (Chars/Sec)

BIOS accepts the following input values (characters/second) for type-
matic rate: 6, 8, 10, 12, 15, 20, 24, 30.
31 Chapter 3
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com