Panel Mounting; Figure1-4: Panel Mounting - Advantech PPC-A84/A120-X5X User Manual

1.6 Panel Mounting

If you decide to panel mount your PPC-A84-X5X/PPC-A120-X5X,
Please find four screws and four nuts in the accessory box.
To mount the PPC-A84 into a panel:
1. Removed the four caps from the front mask, unscew it and remove
the front bezel.
2. Insert the screws into the holes in the front side and tighten with
the nuts in the back side. (In case of tapped hole, nuts are
necessary).
3. Screw back the front bezel.
4. Put the four caps back to the front panel.
Note: T
he panel thickness should not exceed 10 mm.
1 0 PPC-A84/A120 User's Manual

Figure1-4: Panel mounting