Pre-Fi Lter, Filter Assembly / Deodorizing Filter - Hitachi EP-A9000 Instruction Manual

Cleaning

Pre-fi lter, Filter Assembly / Deodorizing Filter

1
Check if the operation has stopped before removing the power plug from the socket
While operating, press the
2
Remove the panel and pre-filter
3
Cleaning
Pre-filter
Remove dust using a vacuum cleaner.
Lightly clean using the nozzle brush of the vacuum cleaner
and vacuum the dust.
If it is extremely dirty, wash it with water and a soft sponge
without using excessive force. Drain well and let it dry in a
well-ventilated area away from direct sunlight.
CAUTION
The stainless coating of the surface will peel off if it is
rubbed with the floor nozzle of a vacuum cleaner or a scrub.
Do not use detergent (kitchen or laundry use) for cleaning.
Filter assembly/Deodorizing filter
If the dust on the filter assembly or deodorizing filter becomes a
bother, remove the dust using a vacuum cleaner.
Lightly clean using the nozzle brush of the vacuum cleaner and
vacuum the dust.
CAUTION
Do not put excessive force and deform the filter assembly.
If the filter assembly is deformed, it will not be detected by
the unit. "
monitor, and the unit will not be able to operate.
If the odor from the air outlet becomes a bother, soak the
deodorizing filter as soon as possible.
4
Attach each filter
5
Attach the pre-filter and panel to the unit
 The pre-fi lter is disposable.
When pre-fi lter needs to be replaced due to damage, purchase the replacement part (Part No. EP-A9000-042).
(P.E-42)
E-34
(Continued)
power button and stop operation.
" will be displayed on the temperature / humidity
(P.E-14, E-15)
(Guide for Cleaning: About Once a Month)
(P.E-14, E-15)
Nozzle brush
Nozzle brush
(P.E-39)
(P.E-35)
(P.E-15)
Pre-filter
Deodorizing filter
Filter assembly
(Do not wash with water)