Replacement Parts; Specifi Cations - Hitachi EP-A9000 Instruction Manual

Troubleshooting Guide
Operations / Others
There is no vapor or mist visible
The movement of the fl ap is unstable, or its
direction is misaligned
The temperature and humidity monitor read-
ings differ from the room thermometer and
hygrometer readings.
The fan stopped
The rotation does not increase smoothly
when "Max" airfl ow rate is used

Replacement Parts

 Filter assembly for Hitachi Air Purifi er
(Allergen-free, HEPA fi lter)
EPF-A9000H
 Pre-fi lter (stainless steel pre-fi lter)
Specify service part
EP-A9000-042.
 Water tank fi lter
Specify service part EP-A9000-039.

Specifi cations

Power Supply
Operation Mode
Applicable Floor Space
Airflow Rate (m 3 /min.)
Power Consumption (W)
Operating Sound (dB)
Humidifying Performance
Tank Capacity
Unit Dimensions
Weight
Power Cord Length
E-42
Symptoms
*1
Max
9.0
85
54
*2
Cause (This is normal)
As the unit employs an evaporating type that produces moistur-
ized air by passing an air stream through the humidifying fi lter, no
vapor or mist is visible.
It may have become misaligned when it was moved by hand. If it
does not work properly because it was moved by hand, stop it by
pressing the "Power" button once, and start the operation again.
The temperature and humidity displayed on the monitor is merely
a guide.
Depending on the difference of room environment, the display
may differ.
The fan may stop
if it is set in eco saving operation.
The rotation gradually increases.
It takes approximately 1 minute for the rotation to increase.
Purchase from Hitachi Home Appliances dealers.
 Deodorizing fi lter for Hitachi Air Purifi er
EPF-A9000D
 Replacement humidifying fi lter for Hitachi Air Purifi er
EPF-A9000KF
AC 100V 50-60Hz
Air Purify Mode
Up to 68m 2
High
4.0
16
38
Approx. 2.5L
669mm (H) × 360mm (W) × 254mm (D)
Approx. 12.5kg
Approx. 1.8m
(Continued)
(P.E-23)
Medium
2.7
10
30
*3
Silent
1.1
7
15