Selecting Operation Mode (Basic Operating Procedure - Hitachi EP-A9000 Instruction Manual

Operation
Selecting Operation Mode (Basic Operations)
 There are three operation modes to choose from. Use these modes according to your preference.
 The fan will not stop while the unit is operating in all operation modes.
(The fan may stop if the unit is set to eco saving operation mode.
 The air purifying feature works in all operation modes.
 Switching the operation mode will set the airfl ow to "Auto".
Operation Mode Patterns and Tips for Selection
Operation Mode
Skin Moist
This operation mode is fit for normal use.
Humidify
· Odor and dust sensors will detect the level of room air contamination.
Air Purify
Afterwards, the unit will switch the airflow rate automatically.
· During "Auto" operation, the unit operates from silent to high airflow.
Mode
Skin Moist
Humidify
Controls the room humidity to about 50%.
Air Purify
· During "Auto" operation, the unit operates from silent to high airflow.
Mode
Skin Moist
Humidify
Increases room humidity and controls it to about 60%.
Air Purify
· During "Auto" operation, the unit operates from silent to high airflow.
Mode
Touch
Each touch changes the operation mode.
E-20
Operation Pattern and Selection
Mode
(P.E-27))
The indicator of the selected mode will light up.
Indicator
Air Purify Auto
Mode
Each press of the button changes the mode.
Air Purify Humidifying
Changing the operation mode will set the airflow to "Auto."
Flap Direction
Upward
Diagonal
Diagonal
Off
PM2.5
Air
Option
flow
Sensor
Skin Moist