Raypak 910500 Owner's Manual And Installation Instructions page 96

2. TOOLS > Touch Screen Setup
Touch Screen Setup Screen. Items can only be adjusted/used if VERSA control board DIP switch 1 is ON (up)
ITEM
Brightness Adjusts screen brightness
Adjusts screen timeout i.e. time till blank
Timeout
screen from last button press
Page Timeout Adjusts page timeout
3D System View Tap to navigate to 3D system view home page
4. TOOLS > Clock Setup
Clpock Setup Screen. Items can only be adjusted/used if VERSA control board DIP switch 1 is ON (up)
ITEM
→
Moves flashing adjustment (item) location
–
Decreases flashing item
+ Increases flashing item
Save Saves all items displayed
Cancel Cancels all items changes prior to saving
Freeze Protection
To enable freeze protection, dip switch position 7 (on the PIM™) must be turned on (UP position).
This is the default position.
If the water temperature drops below 7 °C on the Outlet or Inlet sensors, the water heater pump is
enabled. The pump is turned off when both the Inlet and Outlet temperatures rise above 10 °C
If either the Outlet or Inlet temperature drops below 3 °C, the VERSA starts the burner at the
minimum firing rate. The burner cycle will terminate when both the Inlet and Outlet temperatures rise
above 6 °C.
DISPLAYS
FUNCTION
96
NOTES
Tap and move slide bar to desired setting
Tap and move slide bar to desired setting
Tap and move slide bar to desired setting
-
NOTES
Tap to change flashing item location
Tap to decrease flashing item
Tap to increase flashing item
Tap to save all items displayed
Tap to cancel all items entered prior to saving