Table of Contents
Advertisement
Touchscreen Menu Overview
(1)
Screen only available if ADJUST > Operation Settings > Operation Mode parameter is set to 2 or 3.
(2)
Screen only available if ADJUST > Operation Settings > Target Mode parameter = RSET (H models
only).
3D System View
Master Info
System View
Operation
Settings
System Settings
Mix Settings
Indirect Settings
Outdoor Settings
Modbus Settings
Boiler 1
Boiler 2
Boiler 3
Boiler 4
Boiler Error
History
System Tools
Touchscreen Setup
Clock Setup
Screen Reboot
85
These three screens are used to view system
and master/slave information
Refer to 'VIEW Menu' on page 86
Used to adjust operating parameters
(H models only)
Used to adjust system parameters
(all models)
Not used (screen not available)
Only for H models with indirect DHW
Only
used
for
optional
(2)
compensation
Used for configuring optional EMS/BMS
Refer to 'ADJUST Menu' on page 88
Each boiler screen displays information
relative to the boiler (heater) selected. Also
used to change Outlet Max, Mass, and Post
Purge (pump run-on) parameter settings for
each heater
Displays error history of all connected heaters
Refer to 'BOILER Menu' on page 91
The tools menu contains miscellaneous items
such as screen time-out timer, Celsius to
Fahrenheit, technician test execution, clock
setup, touchscreen reboot and reset to
default function
Refer to 'TOOLS Menu' on page 94
(1)
outdoor
air
Advertisement
Table of Contents
