Boiance Shelf Support (Accessory Option) - OAKWORKS Celesta User Manual

DIRECTIONS FOR USE
BOIANCE SHELF SUPPORT: (ACCESSORY OPTION)
CAUTION
USING THE BOIANCE SHELF SUPPORT:
The shelf and bracket used together allow you to create the perfect place for clients' arms. The shelf can also
be used alone as a table extender for additional head support.
Note: The QuickLock Face Rest is required to use the boiance shelf support system.
TO INSTALL THE BOIANCE SHELF SUPPORT:
First install the QuickLock Face Rest at the head end of the table.
For Arm Rest Usage:
1. Position bracket under-
neath QuickLock.
For Head Support and
Table Extender Usage:
19
• Boiance Shelf Support Weight Limit - 25 lbs (11.3 kg)
• Do not put excessive weight or pressure on the Boiance Shelf Support.
• Excessive pressure can cause premature failure of Boiance Shelf Support.
2. Hook bracket onto cen-
ter support beam on
the QuickLock.
1. Remove face rest from
QuickLock.
3. Lower the bracket down.
Make sure bracket is
engaged with the dowels
on the side of QuickLock.
2. Slide QuickLock into the
tracks. Top track is best
for 4" foam and bottom
for 6" foam.
4. Slide shelf onto bracket.
The top track works best
for this application.