Quicklock Face Rest (Accessory Option) - OAKWORKS PF Series User Manual

DIRECTIONS FOR USE
Q U I C K L O C K F A C E R E S T (A C C E S S O R Y O P T I O N)
CAUTION
Double articulating action provides nearly limitless positioning options
with the QuickLock Face Rest. The adjustable pad takes pressure off
™
sensitive facial areas while providing superb support. The QuickLock
Face Rest can be used in both prone and supine positioning and folds out
of the way when not in use. Adjustments are made easily by loosening
the cam locks, adjusting for height and angle and then locking locks into
that position. The table has a bracket at the head of the table for a variety
of uses.
ATTACHING QUICKLOCK FACE REST:
When attaching the QuickLock
are snapped into place.
To remove the QuickLock
safely aside or store it inside the under-table cabinet until needed.
Tips for Great Positioning using the QuickLock™ Face Rest:
To use the face rest with your clients supine,
rotate the face rest pad so that the thick part of
the pad supports your client's cervical region.
Adjusting the height and angle of the face rest
gives your clients perfectly comfortable support.
The face pad is flexible so that you can bring
the open ends together or spread them apart to
achieve the most comfortable support for any
size face. To avoid your client's chin from
hitting the spacebar, make sure the pad is narrow
enough to support their whole face.
For appropriate cervical flexion, use the cam
locks to adjust the downward angle of the face
rest, making sure that the surface of the face rest
pad at the chin is not lower than the surface of
the table.
• QuickLock Face Rest Weight Limit - 25 lbs (11.3 kg)
• Do not put excessive weight or pressure on the Face Rest.
• Excessive pressure can cause premature failure of the Face Rest.
Face Rest, slide the frame dowels into the bracket until bullet catches
™
Face Rest, gently pull the headrest by the dowels until it comes free. Set it
™
™
3"
Pull by dowels
To remove
Pull by dowels
15