Page 1
USER MANUAL OAKWORKS ® Celesta and Clodagh Gemini ® Celesta ® Clodagh Gemini made in the with US & imported www.OAKWORKS.com · 717.235.6807...
Page 2
OAKWORKS , Inc. tial damages in connection with or ® arising out of the furnishing, per- formance, or use of this document OAKWORKS is a registered and the program material which it ® trademark of OAKWORKS , Inc. describes. ®...
PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS P R O D U C T U S E D E S C R I P T I O N The product is a cord connected spa/massage table for commercial use. It is intended for indoor use. Maximum weight capacity of 500 lbs.
2. Unplug from outlet before adding or removing parts. 3. Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Contact Oakworks Customer Service before use at 717.235.6807.
INSTALLATION The tables come completely assembled and ready to use. Plug the cord into a functioning outlet that is rated for the table. (See Grounding below) Arrange the power cord and control cords so that they will not create a tripping hazard. Be sure access to the plug is not blocked for disconnecting the table from power.
Easily slide to the side CELESTA MODEL CLODAGH MODEL Swing open for cabinet access I M P O R T A N T S A F E T Y N O T E The cabinet hood area under the backrest top is not designed for storage or as an area to hold accessories.
DIRECTIONS FOR USE T A B L E K E Y S W I T C H A table keyswitch is located inside the cabinet on the shelf at the head end of the table. This key switch will lock-out the table and prevent all motions. It should be used to prevent unau- thorized use.
DIRECTIONS FOR USE F O O T C O N T R O L O P E R A T I O N S - E L E C T R I C S A L O N T O P T A B L E S O N L Y CAUTION Do not sit on backrest or footrest sections.
ABC System Weight Limit - 100 lbs. (45 kg.) Do not place foreign objects into the ABC System. Only use as intended. For safety of your client, use a cloth sheet between the ABC System and your client. The OAKWORKS Adjustable Body Comfort (ABC) System is designed to lower the pressure on breasts ®...
DIRECTIONS FOR USE H A N D C O N T R O L O P E R A T I O N S - F L A T T O P T A B L E S O N L Y When using the table Height Up function, do not place anything between the metal frame and CAUTION the base structure as damage can occur to the table.
DIRECTIONS FOR USE H A N D C O N T R O L O P E R A T I O N S - E L E C T R I C S A L O N T O P T A B L E S O N L Y Do not sit on backrest or footrest sections.
CAUTION use as intended. For safety of your client, use a cloth sheet between the ABC System and your client. The OAKWORKS Adjustable Body Comfort (ABC) System is designed to lower the pressure on breasts ® and pectoral muscles, allowing the client to relax and create a more comfortable position for their spine.
DIRECTIONS OF USE I N C A B I N E T O U T L E T This product is equipped with an interior 120-volt 60Hz accessory outlet. The total electrical load of DANGER equipment plugged into this set of outlets is not to exceed 7 amps or 840 watts.
DIRECTIONS FOR USE M O V I N G T H E T A B L E Before moving the table, disconnect the power cord from the power outlet. Secure the power cord and CAUTION all hand or foot controls before moving. The table weighs as much as 300 lbs. (136 kg.) Four people are required to move the table safely.
Do not place foreign objects into the ABC System. Only use as intended. • For safety of your client, use a cloth sheet between the ABC System and your client. The Oakworks Adjustable Breast Comfort (ABC) System is designed to lower the pressure on breasts and pectoral ®...
DIRECTIONS FOR USE ADJUSTABLE SIDE ARM RESTS (ACCESSORY OPTION - SALON ONLY) CAUTION • Do not use the arm rest for client support during the mounting or dismounting of the chair. • The arm rest is not designed to support the client’s weight. TO INSTALL THE ARM RESTS: The Arm Rests adjust automatically as the back rest moves to remain parallel to the floor.
DIRECTIONS FOR USE BOIANCE SHELF SUPPORT: (ACCESSORY OPTION) • Boiance Shelf Support Weight Limit - 25 lbs (11.3 kg) CAUTION • Do not put excessive weight or pressure on the Boiance Shelf Support. • Excessive pressure can cause premature failure of Boiance Shelf Support. USING THE BOIANCE SHELF SUPPORT: The shelf and bracket used together allow you to create the perfect place for clients’...
Follow the cleaners/disinfectant manufacturers’ directions for use. Please note that cleaning and disin- fecting an OAKWORKS ® table is a two part process. First it must be cleaned of any visible soil, then it can be disinfected. OAKWORKS ® recommends that the table be positioned in the flat position during the cleaning process.
• Check table grounding. • Clean unusual buildup of dirt on the table and/or parts of the table not normally cleaned on a regular basis. • Check for tears or cracks in the upholstery. WARRANTY View complete warranty details at www.oakworks.com...
MODEL NUMBER & SERIAL NUMBER P R O D U C T L A B E L L O C A T I O N The model number and serial number are located on the underside of the foot section. Serial Number Model Number 16796025 GNCDES312572ACTTVFN6 Ser#:GMC563146...
SPECIFICATIONS PERMISSIBLE ENVIRONMENT CONDITIONS Conditions Temperature Humidity Atomic Pressure Normal Use 50° (10°C) to 104° (40°C) 20% to 60% RH 98 to 105 kPa Storage & Transport -20° (-29°C) to 135° (57°C) 20% to 95% RH 98 to 105 kPa ELECTRICAL SPECIFICATIONS Designed for: North America...
USER MANUAL OAKWORKS ® Celesta and Clodagh Gemini ® C O N T A C T I N F O R M A T I O N: Oakworks Inc. ® 923 East Wellspring Road New Freedom, PA 17349 Phone: 717.235.6807 FAX: 717.235.6798...
Need help?
Do you have a question about the Celesta and is the answer not in the manual?
Questions and answers