Important Safety Instructions; Product Use Description; Symbol Identification - OAKWORKS Celesta User Manual

PRODUCT USE DESCRIPTION / IMPORTANT SAFETY INSTRUCTIONS
P R O D U C T U S E D E S C R I P T I O N
The product is a cord connected spa/massage table for commercial use. It is intended for indoor use.
Maximum weight capacity of 500 lbs.
The product is intended to be used by trained professionals in a controlled environment. A review of
the following Safety Instructions is important for the safety of the operator and client. Read all instruc-
tions and understand this entire user manual before using the product. There are no known contrain-
dications to the use of this equipment.
The table should not be used in any other manner than that described within this manual. Use of any
unnecessary force or unauthorized procedures could result in injury to practitioner, client or equip-
ment.
S Y M B O L I D E N T I F I C A T I O N
R
U S U S
U L 2 6 0 1 - 1
C 22 . 2 N O . 6 0 1 . 1
~
R
U S U S
C C
U L 2 6 0 1 - 1
C S A C 22 . 2 N O . 6 0 1 . 1
I E C 6 0 6 0 1 - 2 ( 2 00 1 - 0 9 )
----
I M P O R T A N T S A F E T Y I N S T R U C T I O N S
CAUTION
The use of accessories, transducers, and cables other than those specified by the manufacturer, may result in
increased emissions or decreased immunity of the table.
1
This symbol, when used in this manual and on product labels, represents a caution
warning. Be sure to read and comply with all precautions and warnings.
This symbol, when used in this manual and on product labels, warns against an elec-
trical shock hazard. Be sure to observe and comply with all warnings.
This symbol, when used in this manual or on product labels, indicates a Protective
Earth (Ground) Terminal.
This symbol, when used in this manual or on product labels, indicates the date of
manufacture of the device.
This symbol, when used in this manual or on product labels, indicates alternating
current (AC).
This symbol, when used in this manual or on product labels, indicates direct current
(DC).
This symbol is used to indicate that the operator should consult the user manual.
This symbol indicates that when the end-user wishes to discard this product, it must
be sent to separate collection facilities for recovery and recycling.
READ AND SAVE THESE INSTRUCTIONS