Step 6 Install Filters; Step 7 Install Implement Rods; Finalize Installation - Monogram ZV48SSJSS Installation Instructions Manual

STEP 6 INSTALL FILTERS

• Insert the grease filter into the opening and drop into
the trays.
filter up and lift out.
31-2000859 Rev. 0
Installation Instructions
STEP 7 INSTALL IMPLEMENT
RODS
Template for
Monogram
nameplate
Monogram
nameplate
• Use a flat blade screwdriver to install stand-offs into
the bottom of the hood.
hole towards the inside of the hood. Secure the rod
• Install knobs - line up the flat on the shaft with the
flat in the knob hole.
template on page 14 for alignment of the nameplate.
Cut out the template and tape it onto the hood
front surface and verify the template is aligned with
the left side of the hood and within the upper and
the nameplate first before removing the adhesive
release paper.

FINALIZE INSTALLATION

• Install the supplied infrared bulb(s).
• See the Owner's Manual for instructions to test
operation.
Screw
Stand-offs
Into
Hood
Use Allen
Wrench to
Secure Rod
to Stand-offs
15