Table of Contents
Advertisement
The P2 Classe utilizes a very simple user interface. 4 main buttons across the front user panel.
The first two buttons (red/yellow) can be used to dispense cold Sparkling water and the last
two (green/blue) are used to dispense cold Still water. Each of the buttons are programmed to
dispense a preset volume of water and can be reprogrammed if desired.
• One quick push: Initiates dispensing of the preset volume of water. Will automatically
shut off once preset volume is dispensed
• Push and hold: Initiates continuous dispensing of water until the button is released.
• Factory presets for the small and large dispense buttons are 750ml and 1000ml
respectively.
The diagram below details the meaning and operational conditions of the LED panel located on
the right side of the face of the machine.
P2 Classe Manual
OPERATING INSTRUCTIONS
(Flashes during initial fill.)
Page 10 – Revision: 3-2-2021
Advertisement
Table of Contents
