Table of Contents
Advertisement
The above picture shows the Front Water Dispense Buttons for the Waterlogic WL1000GF MAX
Water Treatment System.
Place appropriate receptacle under the Hot or Cold areas for dispensing water.
For Hot Water:
1. Press and hold down the Red Hot Safety Button (LEFT hand side)
2. Press the Red Hot Dispense Button (RIGHT hand side)
*Both buttons must be held at the same time to dispense Hot Water. This is a
safeguard when dispensing hot water to prevent accidental dispensing of hot
water.
For Cold Water:
Press Blue Cold Water Select Button
WL1000GF MAX Manual
OPERATING INSTRUCTIONS
Page 10
Revision 10-7-2017
Advertisement
Table of Contents
