Operating Instructions - WaterLogic WL100 Technical Manual

Operating Instructions

DISPENSING yOUR CHOICE OF WATER IS VERy SIMPLE,
AS FOLLOWS:
1. Place your cup centrally in the dispensing area
2. Select the type of water you wish to be dispensed and press the corresponding
button.
3. Keep the button depressed until your cup has reached the desired level, and
then release the button.
HOT AND COLD MACHINE COLD AND AMBIENT MACHINE
14
The option buttons are very simple to identify. The following instructions apply
for both the hot and cold, and cold and ambient machines.
COLD WATER
Push the cold water button (blue). Cold water dispenses.
HOT WATER
Push the 2 hot (red) buttons together. Hot water dispenses.
AMBIENT (NON-CHILLED) WATER
Push the 2 ambient green buttons together.
Ambient water dispenses.
HOT WATER CAUTION
• Always place cup / mug in the centre of the drip tray.
• Always use a ceramic cup or a cup suitable for use with
hot water.
• Do not hold cup or place hands in dispensing area
whilst dispensing water.
• Do not dispense water in a stop start style of vending
• (Hold the button continuously until cup is full).
• Never try to fill more than one vessel at a time.
Waterlogic 100 Technical Manual - Issue B, September 2011
15