Table of Contents
Advertisement
PUMP MATRIX
Before putting your pump in operation,
check the identification plate (ID) on the pump. The
ID is mentioning the year of construction, the serial
number and the construction code of the pump.
Use the matrix below to define the components
of your pump. Make sure the wetted parts of the
pump are compatible to the pumped liquid.
Pump size
Housing and center section
10 : 3/8"
GG : Conductive Polyethylene
20 : 1/2"
50 : 3/4"
130 : 1 1/4"
EXAMPLE : VA-C20GG TF TO
NOTE:
In case of doubt, please contact your
local supplier. (www.verderair.com)
To build a pump code, please use the
below coding system or use the pump
configurator on www.verderair.com.
PUMP CODING VA-C
valve material
TF : PTFE ball valve
EP : EPDM ball valve
CV : PE cylinder valve
SV: PTFE spring loaded valve
SS : SS316 ball valve
VERDERAIR_VA-C manual_rev2_2020_UK_(uk) | 1.12.2020
Diaphragm material
TO : PTFE overmolded
EO : EPDM overmolded
ID-Plate of Pump
3
Advertisement
Table of Contents
