VERDER VERDERAIR VA25 Manual

VERDER VERDERAIR VA25 Manual

Air-operated diaphragm pump
Hide thumbs Also See for VERDERAIR VA25:

Advertisement

Repair/Parts
VERDERAIR VA 25
Air-Operated
Diaphragm Pump
1-inch pump with modular air valve for fluid transfer applications.
For professional use only.
See page 3 for model information, including approvals.
125 psi (0.86 MPa, 8.6 bar) Maximum Fluid Working Pressure
125 psi (0.86 MPa, 8.6 bar) Maximum Air Input Pressure
Important Safety Instructions
Read all warnings and instructions in this manual.
Save these instructions.
ti13946a
Stainless Steel
Aluminum
ti14342a
Polypropylene
Conductive
Polypropylene
PVDF
End
Flange
859.0089
Rev. M
EN
Center
Flange
ti13843a
ti13844a

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the VERDERAIR VA25 and is the answer not in the manual?

Questions and answers

Summary of Contents for VERDER VERDERAIR VA25

  • Page 1 Repair/Parts VERDERAIR VA 25 Air-Operated 859.0089 Diaphragm Pump Rev. M 1-inch pump with modular air valve for fluid transfer applications. For professional use only. See page 3 for model information, including approvals. 125 psi (0.86 MPa, 8.6 bar) Maximum Fluid Working Pressure 125 psi (0.86 MPa, 8.6 bar) Maximum Air Input Pressure Center Polypropylene...
  • Page 2: Table Of Contents

    Contents Related Manuals ......2 Parts ........17 Pump Matrix .
  • Page 3: Pump Matrix

    Pump Matrix Check the identification plate (ID) for the 17-digit Configuration Number of your pump. Use the following matrix to define the components of your pump. Sample Configuration Number: VA25AA-SSBNBNTNSS VA25 A SS BN BN PART NO. CONFIGURATION NO. SERIAL NO. DATE CODE SERIES MAX WPR PSI-bar...
  • Page 4: Atex Certifications

    ATEX Certifications ✖ Stroke Sensor is certified: ★ All VA25AA, VA25CC, VA25SA, VA25SC pumps are certified: EEx ia IIA T3 Nemko06ATEX1124 II 2 GD c IIC T4 II 1 G Warnings The following warnings are for the setup, use, grounding, maintenance, and repair of this equipment. The exclama- tion point symbol alerts you to a general warning and the hazard symbol refers to procedure-specific risk.
  • Page 5 WARNING EQUIPMENT MISUSE HAZARD Misuse can cause death or serious injury. • Do not operate the unit when fatigued or under the influence of drugs or alcohol. • Do not exceed the maximum working pressure or temperature rating of the lowest rated system component.
  • Page 6 WARNING TOXIC FLUID OR FUMES HAZARD Toxic fluids or fumes can cause serious injury or death if splashed in the eyes or on skin, inhaled, or swallowed. • Read MSDS’s to know the specific hazards of the fluids you are using. •...
  • Page 7: Troubleshooting

    Troubleshooting Problem Cause Solution Pump cycles but will not prime. Pump is running too fast, causing Lower air inlet pressure. cavitation before prime. Check valve ball severely worn or Replace ball and seat. See page 12. wedged in seat or manifold. Seat severely worn.
  • Page 8 Problem Cause Solution Air bubbles in fluid. Suction line is loose. Tighten. Diaphragm (and backup) ruptured. Replace. See page 13. Loose manifolds, damaged seats or Tighten manifold bolts or replace manifold o-rings. seats or o-rings. See page 12. Diaphragm shaft bolt o-ring dam- Replace o-ring.
  • Page 9: Repair

    Repair Pressure Relief Procedure 4. Remove screws (109, metal pumps) or nuts (112, plastic pumps). Remove the air valve and gasket (108). 5. To repair the air valve, go to Disassemble the Air Valve, step 1, in next section. To install a replace- Trapped air can cause the pump to cycle unexpect- ment air valve, continue with Step 6.
  • Page 10 Replace Seals or Rebuild Air Valve Reassemble the Air Valve NOTE: Apply lithium-based grease whenever instructed NOTE: Repair kits are available. See page 25 to order to grease. the correct kit(s) for your pump. Air Valve Seal Kit parts are marked with a †. Air Valve Repair Kit parts are 1.
  • Page 11 209◆† 205◆ 212◆ 214◆ 213◆ 211◆ 203◆ 204◆ 210✠ 208◆† 206◆†✠ 207✠ 202◆ 208◆† 207✠ inlet 206◆†✠ Apply lithium-based grease. 210✠ U-cup lips must face piston. Apply lithium-based grease to contact surface. ti18205b . 3. Air valve assembly 7. Grease and install the detent assembly (203) into the 8.
  • Page 12: Check Valve Repair

    Check Valve Repair Torque to 100 in-lb (11.3 N•m). See Torque Instructions, page 16. Arrow (A) must point toward outlet manifold. Not used on some models. NOTE: Kits are available for new check valve balls and seats in a range of materials. See page 26 to order kits Aluminum pump in the material(s) desired.
  • Page 13: Diaphragms And Center Section

    Diaphragms and Center Section b. Plastic Pumps: Use a 1-1/4 socket or box end wrench on the hex of a fluid side diaphragm plate to remove. Then remove all parts of the dia- phragm assembly. See F . 7. Metal Pumps: Remove the bolt (304) from one side of the diaphragm shaft, then remove all parts of that diaphragm assembly.
  • Page 14 104* 104* HY, SP, BN, VT, and GE models NO and TO (Metal pumps) models (Plastic pumps) ti14037a ti14022a Rounded side faces diaphragm. Apply lithium-based grease. Torque to 20-25 ft-lb (27-34 N•m) at 100 rpm maximum. AIR SIDE markings on diaphragm must face center housing.
  • Page 15 Reassembly All Other Diaphragms - Metal Pumps: Follow all notes in F . 7. These notes contain a. Install the o-ring (301) on the shaft bolt (304). important information. b. Assemble the fluid side plate (13), the diaphragm NOTE: Apply lithium-based grease whenever instructed (15), the backup diaphragm (305, if present), and to grease.
  • Page 16: Torque Instructions

    Torque Instructions 7. To ensure proper seating and extend diaphragm life, attach the second fluid cover with air pressure on the pump. NOTE: Fluid cover and manifold fasteners have a thread-locking adhesive patch applied to the threads. If a. See F .
  • Page 17: Parts

    Parts see page 31 see page 19 see page 20 see page 26 see page 22 see page 26 see page 24 see page 19 see page 27 see page 28 see page 19 see page 26 see page 21 ti14023a 1 Not used on some models.
  • Page 18: Parts/Kits Quick Reference

    Parts/Kits Quick Reference Use this table as a quick reference for parts/kits. See pages indicated in table for full description of kit contents. Ref. Part/Kit Description Qty. Ref. Part/Kit Description Qty. Seats; 4-pack, includes 8 o-rings where Varies Center Section; not sold separately, see needed, see page 26 page 22 859.0009...
  • Page 19: Fluid Section

    Fluid Section Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Manifold Fasteners (6) Fluid Covers Kits include: Fluid Cover and • 1 fluid cover (3) Manifold Material Description Qty. • 4 o-rings, ptfe (12) Aluminum 859.0033 BOLT, hex Fluid Cover and Manifold...
  • Page 20 Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Outlet Manifolds Aluminum Stainless Steel Kits include: Kits include: • 1 outlet manifold (4) • 1 outlet manifold (4) • 3 pipe plugs (8) • 4 o-rings, ptfe (12) •...
  • Page 21 Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Inlet Manifolds Aluminum Stainless Steel Kits include: Kits include: • 1 inlet manifold (5) • 1 inlet manifold (5) • 3 pipe plugs (8) • 4 o-rings, ptfe (12) •...
  • Page 22: Air Section

    Air Section Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Plastic Air Section and P) Aluminum Air Section air valve detail, see page 24 109* *112 108* *108 *105 *106 *102 *103 103* *101 ti14104a *102...
  • Page 23 Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Kit 859.0000, Center Section Rebuild (*) Kit 859.0035, Center Shaft Kit All Models All models Kit includes: Kit includes: • 2 pilot valves (101) • 1 center shaft (104) •...
  • Page 24: Air Valve And Data Monitoring

    Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Air Valve and Data Monitoring 209◆† 205◆ 212◆ 214◆ 213◆ 211◆ 203◆ 204◆ 210✠ 208◆† 206◆†✠ 207✠ 202◆ 208◆† 207✠ 206◆†✠ Apply lithium-based grease. inlet U-cup lips must face piston.
  • Page 25 Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Kit 859.0041, Air Valve Seals (†) Complete Air Valve Replacement Kits All Models Aluminum Kit includes: Kits include: • 2 end cap o-rings (206) • 1 air valve assembly (2) •...
  • Page 26: Seats

    Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options SS BN VA25 Seats Check Balls NOTE: Some kits may not be available for your model. NOTE: Some kits may not be available for your model. See the configurator tool at www.verderair.com or speak See the configurator tool at www.verderair.com or speak with your distributor.
  • Page 27: Diaphragms

    Diaphragms Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 NOTE: Some kits may not be available for your model. See the configurator tool at www.verderair.com or speak with your distributor. Standard Diaphragms Overmolded Diaphragms Kits include: Kits include: •...
  • Page 28 Diaphragms (continued) Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options VA25 Two-Piece Diaphragms Air and Fluid Plates Kits include: Kits for aluminum and stainless steel pumps include: • 8 o-rings, PTFE (12) • air side diaphragm plate (14) •...
  • Page 29: Seat, Check Ball, And Diaphragm Kits

    Seat, Check Ball, and Diaphragm Kits Sample Configuration Number Pump Size Fluid Section Air Section Seats Balls Diaphragms Connections Options SS BN VA25 Parts Qty. Parts Qty. 859.0137 SEAT, stainless steel 859.0131 SEAT, polypropylene (SS, TF, TF) O-RING, PTFE (PP, TF, TF) O-RING, PTFE BALL, PTFE BALL, PTFE...
  • Page 30 Parts Qty. Parts Qty. 859.0143 SEAT, aluminum 859.0147 SEAT, aluminum (AL, BN, BN) (AL, TF, TF) O-RING, PTFE O-RING, PTFE BALL, buna-N BALL, PTFE O-RING O-RING DIAPHRAGM, buna-N DIAPHRAGM, PTFE TOOL, install DIAPHRAGM, EPDM 859.0144 SEAT, aluminum TOOL, install (AL, GE, GE) O-RING, PTFE 859.0148 SEAT, santoprene...
  • Page 31: Accessories

    Accessories Fluid Pressure Relief Kit 819.6479 Grounding Wire Assembly Kit 819.0157 (for aluminum pumps) Includes ground wire and clamp. Includes pipe bushings, hose adapter, relief valve, and tubing. Standard Pipe Flange Kits 819.6885 - Polypropylene Fluid Pressure Relief Kit 819.0159 819.6886 - Stainless steel (for plastic pumps) 819.6887 - PVDF...
  • Page 32: Technical Data

    Technical Data Maximum fluid working pressure ........125 psi (0.86 MPa, 8.6 bar) Air pressure operating range .
  • Page 33 Operating Temperature Range NOTICE Temperature limits are based on mechanical stress only. Certain chemicals will further limit the maximum operating temperature range. Stay within the temperature range of the most-restricted wetted component. Operating at a tem- perature that is too high or too low for the components of your pump may cause equipment damage. Fluid Temperature Range Polypropylene or Aluminum or...
  • Page 34 Goedgekeurd door, Approuvé par, Genehmigt von, Approvato da, Godkendt af , Έγκριση από, Aprovado por, Aprobado por, Hyväksynyt, Intygas av, Schválil, Kinnitanud, Jóváhagyta, Apstiprināts, Patvirtino, Zatwierdzone przez, Approvat minn, Odobril, Schválené, Одобрено от, Faofa ag, Aprobat de 14 May 2012 Frank Meersman Director Verder nv 859.0086 Kontichsesteenweg 17 B–2630 Aartselaar BELGIUM...
  • Page 35: Customer Services/Guarantee

    All VERDER pumps are warranted to the original user against defects in workmanship or materials under normal use (rental use excluded) for two years after purchase date. This warranty does not cover failure of parts or components due to normal wear, damage or failure which in the judgement of VERDER arises from misuse.
  • Page 36 Fax: +27 11 704 7515 e-mail: info@verder.co.uk e-mail: info@verder.co.za United States of America Verder Inc. 110 Gateway Drive Macon, GA 31210 Toll Free: 1 877 7 VERDER Tel: +1 478 471 7327 Fax: +1 478 476 9867 e-mail: info@verder.com 859.0089...

Table of Contents