Pump Matrix - VERDER VERDERAIR PURE Manual

PUmP mATRIx

Before putting your pump in operation,
check the identification plate (ID) on the
pump. The ID is mentioning the year of
construction, the serial number and the
construction code of the pump. Use the
matrix below to define the components of
your pump. Make sure the wetted parts of
the pump are compatible to the pumped
liquid.
Pump size
Housing
08 : 1/4" E : PE
10 : 3/8" G : PE conductive
15 : 1/2" T : PTFE
25 : 1" U : PTFE conductive
40 : 1 1/2"
50 : 2"
Valve Ball
EP : EPDM TO : PTFE overmolded
TF : PTFE EO : EPDM overmolded
SS : SS316
CV : cylinder valve
Note: not all combinations are available
ExAmPLE : VA-P25EE EE TF TO TN OO
NOTE:
PUmP CODINg VA-P
Housing and center section
Center section
E : PE
G : PE conductive
T : PTFE
U : PTFE conductive
Diaphragm Connections
TN : Threated NPT
FD : flanged DIN
FA : Flanged Ansi
FJ : Flanged JIS
VA-P_man_Rev06-2013_UK_(uk) | 18.06.2013
In case of doubt, please contact your
local supplier. (www.verderair.com)
To build a pump code, please use the
below coding system or use the pump
configurator on www.verderair.com.
EE : PE
GG : PE conductive
TT : PTFE
UU : PTFE conductive
OO : standard, no option
SS : stroke sensor
RE : remote
DM : draining manual
DP : draining pneumatical
BS : barrier system with sensors
only
LS : leak detection, sensor only
PD : prepared for dampener
MD : DM + PD
SL : SS + LS
AP : Ansi prepared
VS : Vertical suction
ID-Plate of Pump
Valve seat
Options
3