i
26. Dismantling
There is also a risk of fatal electric shocks when dismounting the Troll Basic DuoFern.
Follow the safety instructions for electrical connection on page 16.
Procedure for dismantling:
Switch off the mains.
1.
Secure the connector against reconnection and check that the system is de-energised.
2.
Carefully remove the operating unit [ 1 ] from the installation housing [ 3 ].
3.
Remove the frame [ 2 ]
4.
Release the installation housing [ 3 ] from the flush-mounted box and disconnect from the
5.
mains lead.
Leave the connector so that it is secured against reconnection or fit with a new unit if required.
6.
i
27. Simplified EU Declaration of Conformity
RADEMACHER Geräte-Elektronik GmbH hereby declares that the Troll Basic DuoFern complies
with the Directive 2014/53/EU (Radio Equipment Directive) .
The full text of the declaration of conformity is available at the following website:
www.rademacher.de/ce
38
EN