RADEMACHER DuoFern HomeTimer 9498-UW Instruction Manual For The Electrical Connection And For Commissioning
  1. Manuals
  2. Brands
  3. RADEMACHER Manuals
  4. Timer
  5. DuoFern HomeTimer 9498-UW
  6. Instruction manual for the electrical connection and for commissioning

RADEMACHER DuoFern HomeTimer 9498-UW Instruction Manual For The Electrical Connection And For Commissioning

Source: rademacher.de
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
DuoFern HomeTimer 9498-UW / 9498-AL
EN
Instruction manual for the electrical connection and for commissioning
Item no.:
3250 13 71 (ultra-white)
3250 13 81 (aluminium)
VBD 593-2-1 (01.21)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DuoFern HomeTimer 9498-UW and is the answer not in the manual?

Questions and answers

Related Manuals for RADEMACHER DuoFern HomeTimer 9498-UW

Summary of Contents for RADEMACHER DuoFern HomeTimer 9498-UW

  • Page 1 DuoFern HomeTimer 9498-UW / 9498-AL Instruction manual for the electrical connection and for commissioning Item no.: 3250 13 71 (ultra-white) 3250 13 81 (aluminium) VBD 593-2-1 (01.21)

  • Page 2: Table Of Contents

    Table of Contents These instructions........... 4 17.5 Switch the automatic timer on/off 1. Key to symbols ..........4 for individual DuoFern actuators ..43 2. Safety information .......... 5 17.6 Automatic dusk function ..... 44 3. Proper use ..........5 17.7 Menu 3 - Customising the automatic 4.
  • Page 3 Table of Contents 19. Software reset (restore factory settings) ..64 23. Factory settings ..........66 20. Dismantling ..........65 24. Time zone table ..........67 21. Simplified EU Declaration of Conformity ..65 25. Warranty conditions ........69 22. Technical Specifications ........ 66...

  • Page 4: These Instructions

    These instructions..describe how to install and operate your DuoFern HomeTimer. Before you begin, please read these instructions through completely and follow all the safety instructions. This manual is a component of the product. Please store it in an easily accessible place. When passing the DuoFern HomeTimer on to a third party, this manual must be passed on as well.

  • Page 5: Safety Information

    2. Safety information The use of defective equipment can lead to personal injury and damage to property (malfunction). ◆ Never use defective or damaged equipment. Please contact our Customer Service depart- ment in the event of faults, see page 72. Incorrect use leads to an increased risk of injury.

  • Page 6: Improper Use

    4. Improper use Using the DuoFern HomeTimer for purposes other than previously mentioned is impermissible and is regarded as improper use. ◆ Never use the DuoFern radio system and its components (e.g. DuoFern HomeTimer) for remote control of devices and systems with heightened safety-relevant requirements or where there is a heightened risk of accidents.

  • Page 7: Included In Delivery

    5. Included in delivery Legend 1. Control unit (50 x 50 mm) 2. Frame 3. Wall bracket 4. 1 x battery (type CR2450) 1 x double-sided adhesive strip (not illustrated) Operating instructions (not illustrated) Installation, see page 18...

  • Page 8: General View - Operating Unit

    6. General view - operating unit [ 1 ] Operating unit Display Set key Menu key Up key Down key SET/Stop key Set key OK key...

  • Page 9: Brief Description Of The Keys

    6.1 Brief description of the keys Operating keys [ Up / Down ] ◆ Manual operation [ Up / Down ] or [ On / Off ]. SET/Stop key, [ ◆ Manual roller shutter stop or manual [ Off ]. ◆...

  • Page 10: Display Symbol Legend

    7. Display symbol legend Setting display illumination, see page 59. [ MO ... SO ] Week days (MON...SUN) Time / setting parameters DuoFern icon Information Switching time programme [ OFFSET ] OFFSET (for Astro time) [ SET ] Setting Automatic operation [ AUTO ] [ PLZ ] Postcode...

  • Page 11: General View - Back / Exchanging The Battery

    8. General view - back / exchanging the battery Danger to life from acid burns ◆ Keep children away from new and used batteries. If a battery has been swallowed, medical assistance must be requested immediately. ◆ In case of contact with the skin, eyes or mucous membranes, there is a risk of burns from the battery acid.

  • Page 12: Menu Overview - Main Menu And System Settings

    9. Menu overview - main menu and system settings Main menu page 19 [1] Automatic mode page 36 [ 2 ] Switching times page 38 [ 3 ] Automatic dusk function page 44 [ 4 ] Automated solar function page 46 [ 5 ] Automatic dawn function page 48 [ 6 ] Random function...

  • Page 13: Menu Overview - Menu 9.8 / Menu 9.9

    9.1 Menu overview - menu 9.8 / menu 9.9 > 9.8 Device settings page 58 > 9.8.1 Summer / Winter changeover page 59 > 9.8.3 Display backlighting page 59 > 9.8.5 Key lock page 60 > 9.8.7 Reversal of rotation direction page 61 >...

  • Page 14: Brief Description

    DuoFern network. You can find a detailed description of the various functions, configuration options and possible combinations for the DuoFern system at: http://www.rademacher.de/duofern. The following DuoFern devices cannot be registered, configured or controlled with the DuoFern HomeTimer: ◆ DuoFern sensors ◆...

  • Page 15: Compatible Switch Ranges

    10.1 Compatible switch ranges (www.rademacher.de) Manufacturer Switch range BERKER Arsys / K1 / S1 BUSCH-JAEGER Busch-Duro 2000 Si / Reflex Si / alpha exclusive / alpha nea / solo / impuls GIRA Standard-System / S-Color-System / stainless steel range /...

  • Page 16: Overview Of Features

    10.2 Overview of features ◆ Display background illumination ◆ Installation wizard for easy commissioning. ◆ Manual operation on site ◆ Group or single control possible ◆ Switching automatic mode on/off ◆ Easy configuration with menu-driven operation ◆ Timer periods Configurable opening [ ] and closing times [ ] ■...
  • Page 17 10.2 Overview of features Description and configuration of the individual functions. A precise description of the individual functions and settings is included starting on page DuoFern settings The settings required for operating the equipment in a DuoFern network are specified starting on page 29.

  • Page 18: Assembly

    11. Assembly The DuoFern HomeTimer is intended for surface-mounting. The supplied wall bracket [ 3 ] can be screwed in place or bonded to the wall. Do not install the device above a height of 2 m. Installation procedure: Mount the wall bracket in the desired mounting position. Screws * adhesive * not included...

  • Page 19: Important Information Prior To Initial Commissioning

    ◆ In order to do so, follow the information provided in the operating manual for the respec- tive tubular motor or belt winder. ◆ For electronic RADEMACHER tubular motors from year of manufacture 2000 onwards, the end points can be configured with the help of the DuoFern HomeTimer, see page 62.
  • Page 20 13. Brief description of the standard display and main menu The main menu Menu number Functions / menus ◆ Enables display and selection of the individual functions and menus. ◆ Manual operation is not possible from the main menu. ◆ No automatic control commands will be executed during the configuration process. ◆...

  • Page 21: Opening And Closing The Menus (Example)

    13.1 Opening and closing the menus (example) Calling up the main menu. By pressing the [ M ] key in the standard display. Select the desired menu or menu number. The selected menu is indicated by a flash- ing icon. Open the menu by pressing the [ OK ] button.

  • Page 22: Group And Single Control

    13.2 Group and single control The DuoFern HomeTimer offers the option of simultaneously controlling [ ALLE ] (ALL) registered DuoFern actuators. Alternatively, it is also possible to select individual actuators to be controlled. Adjustment and control of multi- channel DuoFern actuators. Multi-channel actuators enable you to select and control each channel independently from the others.
  • Page 23 14. Initial commissioning with the help of the installation wizard Configuration sequence for the installation wizard: > Time [ 12:00 ] > Date [ Day.Month ] > Year [ 2013 ] > Postcode [ 46 ] > Assign actuator [ 01 - nn ] >...
  • Page 24 14. Initial commissioning with the help of the installation wizard Registering mode starts automatically. ◆ The number of assigned DuoFern actua- tors is displayed. The rotating bar indicates ◆ Registering mode remains active for that registering mode is maximum 120 seconds. still active.
  • Page 25 14. Initial commissioning with the help of the installation wizard The configured switching time mode will be 8.1. sent to all registered DuoFern actuators. ◆ By way of confirmation, for example, the motors briefly start up and the display counts all registered actuators. ◆...
  • Page 26 14. Initial commissioning with the help of the installation wizard ASTRO Example: The control command is sent at the daily The roller shutters close at the daily calculated re-calculated dusk time. dusk time. The previously configured closing time is interpreted as latest at xx:xx hours. No automatic control function is executed for [ Down ].

  • Page 27: Manual Operation

    15. Manual operation Manual operation is possible from the standard display at any time and has priority over the programmed automatic functions. Group or single control You can control [ ALLE ] (ALL) registered DuoFern actuators simultaneously or select individual actuators to be controlled, see page 22.

  • Page 28: Manual Operation - Jog Mode

    15.1 Manual operation - jog mode As soon as jog mode is activated, it is possible to manually operate the DuoFern HomeTimer in jog mode. Jog mode provides a convenient way to configure Venetian blinds. Pressing the respective operating key [ up / down ] for an extended period causes the DuoFern HomeTimer to automatically move the Venetian blinds to the corresponding end position.

  • Page 29: Duofern Settings

    For this reason, no other DuoFern sensors can be assigned to the DuoFern Home- Timer. ◆ Additional information about logging on can be obtained from the login matrix on our website under: www.rademacher.de The following section serves to describe all required DuoFern settings for the DuoFern HomeTimer.

  • Page 30: Menu 9.9.1 - Logging Duofern

    16.1 Menu 9.9.1 - Logging DuoFern actuators on/off Select and open menu 9.9.1 Log-on/off. The number of assigned DuoFern actuators is displayed. e.g. one actuator. Assign a DuoFern actuator. Switch the desired DuoFern actuator to registering mode. Start the login procedure on the DuoFern HomeTimer.
  • Page 31 16.1 Menu 9.9.1 - Logging DuoFern actuators on/off Log-off a registered DuoFern actuator. Switch the respective DuoFern actuator to log-off mode. Start the log-off procedure on the DuoFern HomeTimer. The display flashes [ OFF ]. The new number of registered devices is displayed after successful logout.
  • Page 32 16.1 Menu 9.9.1 - Logging DuoFern actuators on/off Clearing the DuoFern network. This function enables you to log off all DuoFern actuators from the DuoFern HomeTimer that are no longer accessible via radio. In order to prevent unintentional log-out, ensure that all DuoFern actuators are in range and operational before executing the clearing function.

  • Page 33: Duofern Radio Code

    16.2 DuoFern radio code The radio code enables DuoFern actuators to be set to registering mode. This is especially useful for commissioning flush-mounted devices, as it is not necessary to dismantle them. ◆ The DuoFern actuator radio code is only active for a maximum period of 2 hours after connecting to the power for security reasons.
  • Page 34 16.2 DuoFern radio code After the final digit, the following displays are shown successively. Activate registering mode on the DuoFern actuator. Registering mode re- Quit log-in/out mode in each case on the mains active for maxi- DuoFern actuator. mum 120 seconds. Back to menu selection.

  • Page 35: Remote Log On / Off

    16.3 Remote log on / off This function also enables DuoFern devices to be set to log-in/off mode, e.g. in order to register a DuoFern actuator to additional DuoFern transmitters. ◆ This function can only be used if the desired DuoFern actuator has previously been registered to the DuoFern HomeTimer.

  • Page 36: Menu Overview / Main Menu

    17. Menu overview / main menu Main menu Icon Menu Page AUTO Automatic mode ......36 Switching times ......38 Automatic dusk control ....44 Automated solar function ... 46 Automatic dawn control ..... 48 Random function ....... 50 System settings ......51 17.1 [ AUTO ] Automatic mode Automatic mode on All of the activated automatic functions will be executed if the automatic mode is switched...

  • Page 37: Menu 1- Automatic Mode On / Off

    17.2 Menu 1- Automatic mode on / off Toggling directly to the standard display To do so, press and hold [ OK ] for approx. one second. approx. Toggling is carried out for all registered 2 sec. Automatic mode on actuators.

  • Page 38: Switching Times [ / ]

    17.3 Switching times [ / ] You can configure various opening [ ] and closing times [ ] for the DuoFern HomeTimer in order to open or close your roller shutters at your preferred times. For this purpose, there are three switching time programmes available in menu 9.5 [ ] see page 56: [ 1 ] Weekly switching times (factory setting)
  • Page 39 17.3 Switching times [ / ] ◆ ASTRO Calculation of the respective switching time by means of an "Astro" programme. The opening and closing times are calculated in relation to the date and postcode. Sub- sequently they are linked to the previously configured switching times. Link to the opening time [ ] ■...

  • Page 40: Menu 2 - Configuration Of Opening And Closing Times [ / ]

    17.4 Menu 2 - Configuration of opening and closing times [ / ] The following example shows how to config- ure an opening and closing time for Monday to Sunday. If you want to configure the opening and closing times for another switching time programme, first open menu 9.5 and select the desired switching time programme, see page 56.
  • Page 41 17.4 Menu 2 - Configuration of opening and closing times [ / ] No automatic control function is executed for [ Up ]. If the switching time mode was changed, a 4.1. control signal will be sent automatically to all DuoFern actuators logged in. Set and confirm the opening time [ ] .
  • Page 42 17.4 Menu 2 - Configuration of opening and closing times [ / ] NORMAL Example: At the configured time, a [ Down]-signal will The roller shutters close at the configured be sent to the registered DuoFern actuators. closing time. ASTRO Example: The roller shutters close at the daily re- The control command is sent at the daily...

  • Page 43: Switch The Automatic Timer On/Off

    17.4 Menu 2 - Configuration of opening and closing times [ / ] Information about the [ ASTRO ] switching time mode ◆ If [ ASTRO ] is selected as the switching time mode, the calculated darkness time can be individually customised by means of an offset between –60 and +60 minutes. Dusk can be configured in menu 3, see page 44.

  • Page 44: Automatic Dusk Function

    17.6 Automatic dusk function The automatic dusk function causes the roller shutters to close automatically to the lower end point or configured ventilation position. The twilight time is recalculated every day based on the geographical location and the current date (defined by the configured postcode). 17.7 Menu 3 - Customising the automatic dusk function [ ] Call up the main menu.
  • Page 45 17.7 Menu 3 - Customising the automatic dusk function [ ] The offset function can be used to modify the calculated Astro time by +/– 60 minutes. Configuration is only possible if the following Point 3. = ALLE (ALL) functions have been previously configured: Switching time mode [ ] = ASTRO Set the offset.

  • Page 46: Automated Solar Function

    17.8 Automated solar function The automated solar function enables brightness-dependent control of your roller shutters. An external light sensor is required for this function (e.g. a DuoFern sun sensor). 17.9 Menu 4 - Switching the automated solar function on/off [ ] Call up the main menu.

  • Page 47: Setting The Local Sunshine Position

    17.9.1 Setting the local sunshine position The sunshine position can only be configured individually for each DuoFern actuator. Notes on sunshine position ◆ The running time must be configured prior to setting the sunshine position (see page 52). ◆ The locally mounted light sensor may not be covered by the roller shutters when they are moving downwards.

  • Page 48: Automatic Dawn Function [ ]

    17.10 Automatic dawn function [ ] The automatic dawn function causes the roller shutters to open automatically to the upper end point. The calculated dawn time can be customised by linking the opening times with the [ ASTRO ] switch time mode. 17.11 Menu 5 - Customising the automatic dawn time [ ] Call up the main menu.
  • Page 49 17.11 Menu 5 - Customising the automatic dawn time [ ] The offset function can be used to modify the calculated Astro time by +/–60 minutes. Configuration is only possible if the following Point 3. = ALLE (ALL) functions have been previously configured: Switching time mode [ ] = ASTRO Set the offset.

  • Page 50: Function

    17.12 Menu 6 - Configuring the random function [ ] The random function enables a random delay of the set timer periods ranging between 0 and 30 minutes. The random function is executed for: ◆ all automatic opening and closing times. Call up the main menu.

  • Page 51: Menu 9 - System Settings [ ]

    18. Menu 9 - System settings [ ] This menu enables you to configure additional devices and system settings to customise your DuoFern HomeTimer to your individual preferences. The DuoFern settings are introduced and described from page 29 onwards. The DuoFern settings are shown in menu order in menu 9.9 as shown below.

  • Page 52: Menu 9.1 - Set Time And Date [ ]

    18.1 Menu 9.1 - Set time and date [ Select and open menu 9.1 - Time and date Setting order Time Pressing a setting key for an extended period causes the numbers to progress more quickly. Date [ Day.Month ] Year 18.2 Menu 9.2 - Configure motor running time The run time setting must be configured if:...
  • Page 53 18.2 Menu 9.2 - Configure motor running time Important notes ◆ Tubular motor running times can vary depending on temperature. For this reason, targeted movement to a specific position is subject to certain tolerances. ◆ The running time must be configured as precisely as possible in order for the desired position to be reliably assumed.

  • Page 54: Menu 9.3 - Configure Ventilation Position [ ]

    18.2 Menu 9.2 - Configure motor running time Manually setting the running time Fully close the roller shutters. Subsequently move the roller shutters to the upper end point and make a note of the time required. Enter and confirm the measured running time in menu 9.2.

  • Page 55: Menu 9.4 - Set Postcode [ Plz ]

    18.3 Menu 9.3 - Configure ventilation position [ ] Activate or deactivate the ventilation position. On = Ventilation position on > continue with 4. OFF = Ventilation position off > Return to menu system settings Subsequently move the roller shutters to the desired position.

  • Page 56: Select Menu 9.5 - Switching Time Programme [ ]

    18.5 Select Menu 9.5 - Switching time programme [ The number of opening and closing times that can be configured depends on the desired switching time programme selected in this menu. There are three switching time programs available: [ 1 ] Weekly switching times (factory setting) ◆...

  • Page 57: Menu 9.7 - Set Jog Mode [ T ]

    18.6 Menu 9.7 - Set jog mode [ T ] This function enables you to use the DuoFern HomeTimer to control Venetian blinds. Briefly tapping the operating buttons enables Venetian blinds slats to be conveniently configured. In order to conveniently move the Venetian blinds to the end points, actuate the control key [ Up / Down ] for at least 1 second.

  • Page 58: Menu 9.8 - Device Settings

    18.7 Menu 9.8 - Device settings [ ]; menu overview Menu 9.8 - Device settings Icon Menu Page 9.8.1 Automatic summer / winter changeover ......59 9.8.3 Display backlighting ... 59 9.8.5 Key lock ......60 9.8.7 Reversal of rotation direction 61 9.8.9 End points ......

  • Page 59: Menu 9.8.1 - Automatic Summer/Winter Changeover On/Off

    18.7.1 Menu 9.8.1 - Automatic summer/winter changeover on/off The DuoFern HomeTimer features an automatic summer/winter changeover function. If the controller is not being used in Germany, it may be necessary to switch off the automatic summer / winter clock change function. Select and open menu 9.8.1 Summer/ winter changeover.

  • Page 60: Menu 9.8.5 - Switch Key Lock On/Off

    18.7.3 Menu 9.8.5 - Switch key lock on/off You can activate the key lock to protect against unintentional input. Automatic activation after approx. two minutes. If the key lock is activated and no keys are pressed within a period of two minutes, the key lock is activated automatically.

  • Page 61: Menu 9.8.7 - Switch Reversal Of Rotation Direction On/Off

    18.7.4 Menu 9.8.7 - Switch reversal of rotation direction on/off The reversal of rotation direction function can be used to change the direction of rotation if the direction of a DuoFern actuator is incorrect. Select and open menu 9.8.7 - Reversal of rotation direction.

  • Page 62: Menu 9.8.9 - Configuration Of End Points For The Tubular Motor

    You can use your DuoFern HomeTimer to configure the end points for an electronic RADEMACHER tubular motor. The end point setting function is only available for RADEMACHER electronic tubular motors from 2000 onwards. The end point setting can not be adjusted for tubular motors connected in parallel.

  • Page 63: Menu 9.8.0 - Display Software Version

    18.7.5 Menu 9.8.9 - Configuration of end points for the tubular motor Set the lower end point. Press and hold the set button. The roller shutters travel downwards. Release the button as soon as the desired The lower end point is thereby stored for the motor.

  • Page 64: Software Reset (Restore Factory Settings)

    19. Software reset (restore factory settings) If necessary, you can erase all of your settings and return the DuoFern HomeTimer to its original factory settings. Simultaneously press and hold all four keys for 5 seconds, until all of the icons are shown on the display.

  • Page 65: Dismantling

    Carefully pull the operating unit [ 1 ] and cover frame [ 2 ] off of the wall bracket [ 3 ]. 21. Simplified EU Declaration of Conformity RADEMACHER Geräte-Elektronik GmbH hereby declares that the DuoFern HomeTimer complies with the Directive 2014/53/EU (Radio Equipment Directive) .

  • Page 66: Factory Settings

    22. Technical Specifications External dimensions control unit [ 1 ]: 50 x 50 mm x 12 (according to DIN 49075) Colour: ultra-white / aluminium Nominal voltage: 3 V (DC) Battery type: 1 x CR2450 Battery life: 1.5 years with display backlighting* 3 years without display backlighting* * at five switching processes per day Permissible ambient temperature:...

  • Page 67: Time Zone Table

    24. Time zone table Belgium 134 Lyon 165 Utrecht 199 Andermatt 101 Antwerp 135 Montpellier 200 Chur Norway 102 Bruges 136 Nantes 201 Lausanne 166 Oslo 103 Brussels 137 Nice 202 Lucerne 167 Stavanger 104 Liege 138 Paris 203 Zurich 168 Bergen 105 Mechelen 139 Reims...
  • Page 68 24. Time zone table 233 Seville 234 Santander 235 Valencia 236 Valladolid 237 Vitoria 238 Zaragoza 239 La Palma 240 Tenerife 241 Grand Canaria 242 Fuerteventura South-east Europe 243 Athens 244 Belgrade 245 Bratislava 246 Bucharest 247 Budapest 248 Istanbul 249 Maribor 250 Prague 251 Sarajevo...

  • Page 69: Warranty Conditions

    Proof of this must be provided by presenting a copy of the bill. RADEMACHER shall remedy any defects, which occur within the warranty period free of charge either by repair or by replacement of the affected parts or by supply of a new replacement unit or one to the same value.
  • Page 72 RADEMACHER Geräte-Elektronik GmbH Buschkamp 7 46414 Rhede (Germany) info@rademacher.de www.rademacher.de Service: Hotline 01807 933-171* * 30 seconds free of charge, subsequently 14 cents / minute from Fax +49 2872 933-253 German fixed line networks and max. 42 cents / minute from service@rademacher.de...

This manual is also suitable for:

Duofern hometimer 9498-al3250 13 713250 13 81

Table of Contents