11.2 Logging off DuoFern transmitters
1.
+
Switch the desired DuoFern transmitter to logout mode.
2.
3.
Log the next DuoFern transmitter on / off. In order to do so, repeat steps 1 to 2.
4.
5.
Activate logout mode.
Simultaneously press and hold the buttons for
approx. 4 seconds.
The timer LED flashes red:
Logout mode remains active for approx. 120 seconds.
Pay attention to the timer LED.
flashes red
Logout mode is active.
green (for 5 seconds)
Log off was successful. Afterwards, the LED will light up red
again, if the automatic timer has been activated.
red
The logout process failed,
for example if:
◆ An attempt was made to log-off a DuoFern transmitter
that is not logged-on.
Cancel the logout process.
You can cancel the logout process at any time by briefly
pressing the [ SET/Stopp ] key.
EN
23