Switching The Automated Solar Function On/Off - RADEMACHER Troll Basic DuoFern 5615 Instruction Manual

14.1 Switching the automated solar function on/off

The automated solar function enables brightness-dependent control of your roller shutters.
The control signals for this function are provided by a light sensor on the DuoFern network.
When the automated solar function is triggered, your roller shutters will then lower to the
configured sunshine position. Once the solar program is ended, the roller shutters move
completely up to the upper end point.
1.
2.
28
Press and hold the solar button for approx. 1 second.
Observe the solar LED:
OFF
The automatic solar function is switched off.
ON
The automatic solar function is switched on.
Flashing
The automated solar function is active, the roller shutters will
be lowered to the sunshine position. The LED continues to
flash when the roller shutters are in the sunshine position.
EN