Set The Ventilation Position - RADEMACHER Troll Basic DuoFern 5615 Instruction Manual

i

20. Set the ventilation position

If you do not want the roller shutters to close fully to the lower end point, you can use this
function to configure an arbitrary position (e.g. as ventilation position).
◆ When closing automatically, the roller shutters will stop at the ventilation position,
however, they can subsequently be closed completely via manual operation.
◆ The ventilation position can be changed at any time.
NOTE
The motor running time must be configured prior to setting the ventilation position, see
page 26.
/
1.
+
2.
3.
+
Move the roller shutters to the desired ventilation
position and stop.
Store the ventilation position. In order to do so,
press both keys for approx. one second.
The dawn LED flashes red by way of confirmation.
Revoke the ventilation position.
If you want to revoke the ventilation position, first close the
roller shutters fully and then save the position again. This will
set the ventilation position to the lower end point.
EN
33