Error Messages; Dismantling - RADEMACHER Troll Standard 5620 Instruction Manual

i

23. Error messages

Error 2 (display „E2")
Internal device error highlighting that the Troll Standard may be
defective.
◆ Please then contact RADEMACHER Service, see page 60.
i

24. Dismantling

There is a risk of fatal electric shock when touching electrical
components.
◆ Disconnect all phases of the mains power cable and secure it to
prevent any reconnection. Check that the system is de-energisedt.
1.
Switch off the mains power, secure it against restarting and check that
the system is de-energised
2.
Carefully pull the operating unit out of the installation housing.
3.
Remove the frame.
4.
Release the claw fasteners of the installation housing and pull it out of
the flush-mounted box.
5.
Disconnect the connecting cable from the installation housing.
6.
Secure the connection point against restarting and the connecting
cable from unintentional contact.
DANGER!
EN
55