Clearing The Duofern Network - RADEMACHER Troll Basic DuoFern 5615 Instruction Manual

11.3 Clearing the DuoFern network

This function enables you to log off all DuoFern transmitters from the Troll Basic DuoFern that
are no longer accessible via radio.
NOTE
◆ Not all battery-operated DuoFern transmitters (e.g. the DuoFern manual central operating
unit) can be logged off in this way.
◆ A software reset must be carried out in order to logout and delete all DuoFern transmit-
ters (see page 37).
+
1.
2.
24
+ Activate the clear function.
Simultaneously press and hold the three buttons for
approx. 4 seconds.
The timer LED flashes red:
The timer LED will light up green for 5 seconds as
soon as the clearing process has completed.
Purge was successful. Afterwards, the LED will light up red
again, if the automatic timer has been activated.
NOTE
You can cancel the clearing process at any time by briefly
pressing the [ SET/Stopp ] key.
EN