RADEMACHER Troll Basic DuoFern 5615 Instruction Manual page 36

i
23. End point adjustment
Set the upper end point.
+
1.
+
2.
Set the lower end point.
+
3.
+
4.
Changing or correcting the end points
Move the roller shutters to the centre position and configure the respective end
5.
point again.
36
Simultaneously press and hold the buttons.
The roller shutters travel up.
The solar LED flashes red by way of confirmation.
Release the buttons...
...as soon as the roller shutter achieve the desired position for
the upper end point. The roller shutters stop and the upper
end point is stored.
Simultaneously press and hold the buttons.
The roller shutters travel down.
The solar LED flashes red by way of confirmation.
Release the buttons...
...as soon as the roller shutters achieve the desired position
for the lower end point. The roller shutters stop and the lower
end point is stored.
EN