Time The Running Duration Of The Motor And Enter It Into The Duofern Controller; Setting The Sunshine Position - RADEMACHER Troll Basic DuoFern 5615 Instruction Manual

i

13.2 Time the running duration of the motor and enter it into the DuoFern controller

1.
Enter the noted time in the central DuoFern controller (e.g. HomePilot®).
2.
NOTE
◆ As soon as the motor running time is transferred from the central DuoFern controller to
the Troll Basic DuoFern, you will receive confirmation from the system by way of the roller
shutter briefly starting up.

14. Setting the sunshine position

You can set an arbitrary position (sunshine position) which your roller shutters will lower
to when the automated solar function is activated.
NOTE
The running time must be configured prior to setting the sunshine position, see page 26.
/
1.
+
2.
Subsequently move the roller shutters to the upper
end point and make a note of the time required.
Move the roller shutters to the desired position
and stop.
Save the sunshine position.
The solar LED flashes rapidly by way of confirmation. Once
the key is released, the automated solar function is activated
and the LED lights up permanently red.
EN
27