RADEMACHER Modi 2650 Installation And Instruction Manual
Belt box timer
Source: rademacher.de
Related Manuals for RADEMACHER Modi 2650
Summary of Contents for RADEMACHER Modi 2650
- Page 1 Modi Belt Box Timer Installation and Instruction Manual Item no. 3100 05 12 VBD 628-2 (01.21)
-
Page 2: Table Of Contents
Contents This manual........................3 How to use this manual ....................3 Hazard symbols ......................3 Levels of danger and signal words ................3 Symbols and depictions used ..................4 Safety instructions ......................5 Intended use .......................6 Improper use ......................6 General view.......................7 Functional description....................8 Electrical connection....................12 Installation ........................15 Commissioning the Modi Belt Box Timer ..............17 Basic settings / current time ..................18... -
Page 3: This Manual
This manual..describes how to connect, install and use the Modi Belt Box Timer. How to use this manual ◆ Before you begin, please read this manual through completely and follow all the safety instructions. ◆ This manual is part of the product. Please store it in an easily accessible place. ◆... -
Page 4: Symbols And Depictions Used
Symbols and depictions used Depiction Description ▲ Press or tap the button ▲ Release the button Procedures Itemisation ◆ Further useful information Please read the respective manual. -
Page 5: Safety Instructions
Safety instructions Danger due to electric shock when working on all electrical systems. ◆ The electrical connection and all work on electrical systems must only be carried out by a qualified electrician in accordance with the connection instructions in this manual, see page 14. -
Page 6: Intended Use
Intended use Only use the Modi Belt Box Timer for connecting and controlling a tubular motor for: ◆ Roller shutters Operating conditions: ◆ Only operate the Modi Belt Box Timer in dry rooms. ◆ A 230 V / 50 Hz power supply, together with a site-provided disconnecting device (fuse, MCB), must be available at the installation location. -
Page 7: General View
General view Front cover Slot removable under the cover LCD display Timer button Week button Operating buttons SET button Operating mode Sun button selector button Dusk button Changeover Slot Summer / winter time under the cover ▲ Plug-in connection for the light sensor Display of the week days (MO = Monday / SO = Sunday) MO DI MI DO FR SA SO 2 2 : i 7... -
Page 8: Functional Description
Functional description The Modi Belt Box Timer is used for connecting and controlling tubular motors and can be installed in existing belt boxes. Various operating modes and functions are available: ◆ Manual mode Using the operating buttons on the device ●... - Page 9 Functional description Automatic mode Standard programme 8 : 0 0 Configuration of an opening and ➜ closing time for your roller shutter. The configured switching times apply AUTO ▲ to all days of the week. Week programme ➜ 2 2 : 0 0 Individual configuration of an open- ing and closing time of your roller shutter each day.
- Page 10 Functional description Automatic sun and dusk function The automatic sun and dusk function enables brightness-dependent control of your roller shutter in combination with the light sensor. To do this, the light sensor is secured to the window pane and then plugged into the Modi Belt Box Timer. Automatic sun function The automatic sun function enables the automatic raising and lowering of the roller shutter once a limiting value is exceeded.
- Page 11 Functional description Automatic dusk function The automatic dusk function enables the automatic lowering of the roller shutter once a configured set limit is exceeded. The roller shutter moves to the lower end stop. Automatic lowering At dusk, the roller shutter will lower approximately 10 seconds after ex- ceeding the pre-configured set limit and moves to the lower end stop.
-
Page 12: Electrical Connection
Parallel connection of tubular motors: ◆ You can connect a maximum of two RADEMACHER tubular motors in parallel with the Modi Belt Box Timer. ◆ Other tubular motor products may only be connected in parallel after consultation with the respective manufacturer. - Page 13 Electrical connection Safety instructions for the electrical connection DANGER! There is a risk of fatal electric shock in case of direct contact with connecting terminals or if connecting cables come into contact with a metallic belt box. ◆ Carry out all installation and connection work in an isolated and de-energised state.
- Page 14 Electrical connection Connection diagram Use the enclosed connector to con- nect the Modi Belt Box Timer to the Extension inputs, e.g. connection of an external pushbutton mains power and the tubular motor. DOWN You can prewire the connector prior to the final installation in accordance with the connection diagram.
-
Page 15: Installation
Installation Carefully pry off the front panel and then slide the Modi Belt Box Timer into the belt box. WARNING! WARNING! A damaged connecting cable may cause a short circuit. ◆ Ensure that the connecting cable is laid safely. ◆ The connecting cable may not be pinched when screwing on the Modi Belt Box Timer as this could lead to damage. - Page 16 Installation Fastening and connecting the light sensor You must use a light sensor for brightness-dependent control of the Modi Belt Box Timer (automatic sun / dusk function). Secure the light sensor to the window pane using the suction cup. It measures the current brightness there.
-
Page 17: Commissioning The Modi Belt Box Timer
Commissioning the Modi Belt Box Timer Switching on the power – – – Press the TIMER button when the display shown opposite appears. AUTO ▲ ▼ However, if any time appears on the display after switching on the device, please carry out a software reset (see page 32). -
Page 18: Basic Settings / Current Time
Basic settings / current time In order for the Modi Belt Box Timer to operate in automatic mode, you must make some basic settings. First set the current time. Setting the current time Press and hold... I 2 : 0 0 for example, if you want to set 13:00 AUTO ▲... -
Page 19: Basic Settings / Summer And Winter Time
Basic settings / summer and winter time You can also switch your belt box timer between summer and winter time depending on the time of year. ◆ When switching from winter to summer time, the internal clock is set 1 hour forward. -
Page 20: Standard Programme
Standard programme Setting a general opening time (e.g. 7:15 hours) Press and hold 7 : 0 0 ▲ (moves the time forward) AUTO ▲ ▼ Release the buttons... ▲ 7 : 15 as soon as the desired opening time is reached, adjust by running through AUTO ▲... -
Page 21: Week Programme
Week programme Week programme input mode If you want to set separate opening and closing times for each day of the week, you must activate the week programme input mode. You can also set two switching times, which will apply in addition to the daily settings on all days of the week. - Page 22 Week programme Setting the opening time for Monday [ MO ] The pre-configured opening and closing time for Monday is 2 0 : 0 0 displayed alternately. ▼ AUTO ▲ Accessing the factory setting ▲ 7 : 0 0 AUTO ▲ ▼ Press and hold ▲ 7 : 3 0 (moves the time forward) AUTO ▲...
- Page 23 Week programme Exiting the settings If you do not want to configure any further settings, press the week button several times until you have completed all the input points in the week programme. Setting additional simultaneous switching times You can also set two switching times in the week programme if you wish, which will apply on all days in addition to the individual daily switching times.
- Page 24 Week programme Switch between the week and standard programme 2 sec. The operating mode changes MO DI MI DO FR SA SO 2 2 : I 7 2 sec. after pressing the week button. AUTO MANU ▲ ▼ The standard programme is active.
-
Page 25: Setting The Automatic Sun Function
Setting the automatic sun function Switching the automatic sun function on / off Press and within 2 seconds... ▲▼ AUTO MANU Press again until... the display changes from MANU to AUTO or from AUTO to MANU . AUTO MANU ▲▼ Pay attention to the display: MANU Automatic sun function is switched off... - Page 26 Setting the automatic sun function Adopting the current brightness value as the set limit Press This switches on the automatic AUTO MANU sun function. ▲▼ Example: The current brightness value is saved as the set limit. Configure the brightness set limit at which your roller shutter should be lowered.
-
Page 27: Setting The Automatic Dusk Function
Setting the automatic dusk function Switching the automatic dusk function on / off Press and within 2 seconds... 5: 5: ▲▼ AUTO MANU Press again until... the display changes from MANU to AUTO or from AUTO to MANU . 5: 5: AUTO MANU ▲▼... - Page 28 Setting the automatic dusk function Adopting the current dusk value as the set limit Press This switches on the automatic dusk function. AUTO MANU ▲▼ Example: The current dusk value is saved as the set limit. Configure the dusk set limit at which your roller shutter should be closed.
-
Page 29: Operating The Modi Belt Box Timer, Manual Mode
Operating the Modi Belt Box Timer, manual mode Manual operation with the operating buttons You can operate the Modi Belt Box Timer at any time with the UP (▲) or DOWN (▼) operating buttons. Manual operation is possible in any operating mode and has priority over the automatic functions. -
Page 30: Operation In Jog Mode
Operating the Modi Belt Box Timer, manual mode Raising the roller shutter in normal ▲ 7 : 0 0 mode The roller shutter moves to the upper MANU ▲ ▼ end stop. 2 0 : 0 0 Lowering the roller shutter The roller shutter moves to the lower MANU ▲... -
Page 31: Manual Mode With An External Button
Manual mode with an external button It is possible to operate the Modi Belt Box Timer with an external button. If necessary, you can connect several Modi in parallel to a push-button and operate them remotely with the push-button. You can also connect other controllers instead of a push-button. Switching sequence with an external button Ext. -
Page 32: Deleting All Settings / Software Reset
Deleting all settings / software reset You must carry out a software reset in order to delete your settings. The following settings are deleted: ◆ Summer and winter time ◆ Current time ◆ Current day ◆ Individual switching times in: Standard programme ●... -
Page 33: What To Do If
What to do if...? Fault Possible cause/solution ... The display flashes? Power failure. Remedy the cause of the power failure and then check the display: ◆ If the current time appears, your belt box timer is active again. ◆ If the reset display appears (see page 32), the power failure has lasted for longer than 8 hours. - Page 34 What to do if...? Fault Possible cause/solution ... The roller shutter closes too The brightness behind the roller shutter (on the far (passes the light sensor) sensor) is even higher than the preconfigured set when the automatic sun limit. function is active? Configure the set limit for the automatic sun func- tion at a higher setting.
-
Page 35: Technical Specifications
Technical specifications Supply voltage: 230 V / 50 Hz Switching current: 5 (4) A µ (type 1B) Standby power: ≤ 0.35 W Extension inputs: 2 /UP (▲) and DOWN (▼) Extension input switching voltage: 230 V / 50 Hz Mounting type: Flush mounting Setting ranges: Sensitivity to sunlight:... -
Page 36: Dimensions
Dimensions 33.6 AUTO ZUFALL MANU All dimensions in mm... -
Page 37: Simplified Eu Declaration Of Conformity
Simplified EU declaration of conformity RADEMACHER Geräte-Elektronik GmbH hereby declares that the Modi Belt Box Timer (item no. 3100 05 12) complies with the Directives 2014/35/EU (Low Voltage Directive) and 2014/30/EU (EMC Directive). The full text of the declaration of conformity is available at the following website: www.rademacher.de/ce... -
Page 38: You Can Note Your Settings Here
You can note your settings here Standard programme: General opening time (UP): ....hours General closing time (DOWN): ....hours Week programme: Opening time (▲) Closing time (▼) Monday: ....hours ....hours Tuesday: ....hours ....hours Wednesday: ....hours ....hours Thursday: ....hours ....hours Friday: ....hours ....hours Saturday: ....hours... -
Page 39: Warranty Terms And Conditions
Proof of this must be provided by presenting a copy of the invoice. RADEMACHER will remedy any defects that occur within the warranty period free of charge either by repair or by replacement of the affected parts or by supplying a new replacement unit or one to the same value. - Page 40 RADEMACHER Geräte-Elektronik GmbH Buschkamp 7 46414 Rhede (Germany) info@rademacher.de www.rademacher.de Service: Hotline 01807 933-171* * 30 seconds free of charge, subsequently 14 cents / Telefax +49 2872 933-253 minute from German fixed line networks and max. 42 service@rademacher.de cents / minute from German mobile networks.