Assembly - RADEMACHER Troll Basic DuoFern 5615 Instruction Manual

i

8. Assembly

The Troll Basic DuoFern is designed for flush-mounted installation. For this, you require a
58mm flush-mounted box. We recommend using a deep box.
[ 1 ]
Installation procedure:
Switch off the mains.
1.
Make the electrical connection according to the wiring diagram (see page 17).
2.
Route the power cables to the flush-mounted box.
3.
Slide the installation housing [ 3 ] into the flush-mounted box and clamp the claws [ 5 ] in
4.
place with the screws provided.
Fit the frame [ 2 ].
5.
Carefully insert the operating unit [ 1 ] into the installation housing [ 3 ].
6.
Switch the mains power back on again.
7.
18
Connecting terminals on bottom > [ 4 ]
[ 2 ]
EN
[ 5 ]
[ 3 ]