21.6 Menu 6.6 - Configuring the total running time and Venetian blind mode [ T ]
If the SpeedTimer is being used to control a Venetian blind, the
controller can be configured correspondingly.
The following configurations are possible:
◆ Total running time
◆ Jog mode
◆ Automatic slat adjustment
Brief description of the total running time
The total running time sets the relay on-period for the respective
direction of travel. This avoids unnecessary waiting times, for
example, as a result of reversing after closing a Venetian blind.
i
The required time for completely opening the roller shutter or
Venetian blind must be measured with a stopwatch prior to
configuring the total running time.
48
i
If blockage detection is activated (see page 42), it is not
necessary to configure the total running time as the control-
ler will detect when the end point is reached.
Brief description of jog mode
Jog mode enables Venetian blind slats to be conveniently con-
figured. In doing so, the Venetian blind motor is powered for as
long as the control button is actuated.
In order to conveniently move a Venetian blind to the end points,
actuate the control button for 1 second longer than the configured
tilting time. Once the button is released, the Venetian blind will
move to the end point without stopping.
EN