Assembly - RADEMACHER DuoFern HomeTimer 9498-UW Instruction Manual For The Electrical Connection And For Commissioning

i

11. Assembly

The DuoFern HomeTimer is intended for surface-mounting. The supplied wall bracket [ 3 ]
can be screwed in place or bonded to the wall.
Do not install the device above a height of 2 m.
Installation procedure:
Mount the wall bracket in the desired mounting position.
1.
Carefully remove the separating film from the battery compartment, see page 11.
2.
Please ensure that none of the buttons are pressed during the mounting process.
Finally, apply slight pressure to insert the operating unit [ 1 ] and covering frame [ 2 ] into
3.
the wall bracket [ 3 ].
2.
1.
18
Screws *
or
adhesive
* not included
3.
EN