System Recovery - Omron NA5-15W101S-V1 User Manual

4-2

System Recovery

You can implement system recovery if the NA Unit will not start normally or if you want to initialize the
contents of the NA Unit to the default state.
When you implement system recovery, all of the user data is deleted from the NA Unit and the system
program is overwritten with the newest version.
System Recovery Procedure
Use the following procedure for system recovery.
1
Prepare a formatted SD Memory Card or USB Memory Device.
Precautions for Correct Use
• An SD Memory Card that is formatted in a manner that the master boot record is not
arranged in the first sector cannot be used for system recovery. To use the SD Memory Card
for system recovery, first format the SD Memory Card in the SD Memory Card Formatter for
SD/SDHC/SDXC distributed by the SD Association.
• Among the HMC-SD291 SD Memory Cards, the SD Memory Cards with the E mark at the
position indicated by the arrow in the figure below cannot be used for system recovery.
2
Execute the following file in the Sysmac Studio installation media.
Sysmac_Studio_installation_media\Utility\
NA5V1_RecoverUpdate\NA_RecoverUpdate___.exe
3
Specify the root folder on the media you prepared in step 1 as the extraction location.
Additional Information
• Files stored on the media may be deleted.
• When you use the media for other applications, format again with a third party format tool.
4
Turn OFF the power supply to the NA Unit.
5
Open the battery cover on the back of the NA Unit and set the DIP switch to the settings shown
below. When you finish setting the DIP switch, close the battery cover.
NA5-
NA-series Programmable Terminal Hardware(-V1) User's Manual (V125)
-V1
4 System Program
4 - 3
4