Xerox EC70 User Manual page 111

2. Grasp Handle #2 and turn it to the unlocked position.
Note: To avoid burns, power off the printer, then wait at least 5–10 minutes to allow the
fuser to cool. Observe warning labels inside the printer.
3. Carefully pull out the Transfer Module.
4. Grab and lift the Amber-Gold colored handle only, lift and pull up and out of the Transfer Module.
5. Dispose the Fuser as normal office waste or recycle the fuser.
6. Remove the new Fuser from its packaging.
Xerox ® EC70 Color Copier/Printer
User Guide
Maintenance
111