U-Line UHDE215 User Manual & Service Manual page 14

USER GUIDE
Assemble and Connect Regulator
to Nitrogen Tank
1. Attach ball valve to tank regulator. Tighten with
an adjustable wrench. Make sure valve is in the off
position - turned clockwise as far as it can go.
2. Attach regulator to nitrogen tank. Hand tighten the
coupling nut and then use an adjustable wrench for an
additional quarter turn. DO NOT OVER TIGHTEN
General Installation
Connect Keg to Dispenser Tower
1. Attach black nitrogen coupler of the liquid jumper line
to keg. With your thumb on top of the coupler, pull
up on collar and press coupler down firmly onto out
valve. Release collar - listen for a click. Pull up on the
coupler to ensure it is locked down.
Out Valve
2. Attach other end of beverage hose to "Y" connection
within dispenser tower - line up and press in firmly.
3. Attach hose to elbow connector on infuser regulator.
Other end is
connected to
Tower
14
u-line.com
Other end is
connected to keg
Elbow
Connector