Table of Contents
Advertisement
Chapter 5
General Checklist
80
Should you experience problems using the DT3120 board, please
follow these steps:
1.
Read all the appropriate sections of this manual. Make sure that
you have added any "Read This First" information to your
manual and that you have used this information.
2.
Check your CD-ROM for a README file and ensure that you
have used the latest installation and configuration information
available.
3.
Check that your system meets the requirements stated in the
DT3120 Getting Started Manual.
4.
Check that you have installed your hardware properly using the
instructions in the DT3120 Getting Started Manual.
5.
Check that you have installed and configured the device driver
properly using the instructions in the DT3120 Getting Started
Manual.
If you still experience problems, try using the information in
to isolate and solve the problem. If you cannot identify the problem,
refer to
page
84.
Table 14
Advertisement
Table of Contents
