Table of Contents
Advertisement
Supported Software
The following software is available for use with a DT3120 board:
• DT3120 Device Driver − This software, which is
operating-system specific, is provided on the Imaging OMNI CD,
which is shipped with the board. You must install this device
driver to use a DT3120 board with any of the supported software
packages or utilities. Refer to the DT3120 Getting Started Manual
(UM-18113) for information on installing the device driver.
• DT-Acquire − This software is provided on the Imaging OMNI
CD, which is shipped with the board. This utility allows you to
verify the operation of your board during startup. Refer to the
DT3120 Getting Started Manual for information on installing and
using this utility.
• GLI/2 Streamline − This package is shipped with the board if
you purchased the SCI-PAK package. This package allows you
to create scientific applications using object-oriented image
processing tools.
• 32-Bit Frame Grabber SDK − Use this software package,
provided on the Imaging OMNI CD, if you want to develop your
own application software for the DT3120 board using the
Microsoft C compiler in Windows 98, Windows Me, Windows
2000, or Windows XP.
• DT-Active Open Layers − Order this optional software package
if you want to use the DT-Active Open Layers ActiveX control to
access the capabilities of the DT3120 board using Microsoft
Visual Basic or Visual C++.
• GLOBAL LAB Image/2 − Order this optional software package if
you want to develop scientific applications using object-oriented
image processing tools.
• DT Vision Foundry − Order this optional software package if
you want to develop machine vision applications using
object-oriented image processing tools.
Overview
1
1
1
1
1
1
1
1
1
3
Advertisement
Table of Contents
