9.
Select the DT3120 board to configure.
10. Select the Video Format as either 50 Hz or 60 Hz.
11. When you are finished, click Done.
If you made any changes, the Save Changes dialog box appears.
12. If you want to save your changes, click Yes.
Modifying a Board in the Device Driver
Configuration
To modify a board in the device driver configuration, perform the
following steps:
Open the Control Panel.
1.
2.
Double-click the DT Imaging Control icon.
3.
Select the DT3120 board to configure.
4.
Select the Video Format as either 50 Hz or 60 Hz.
5.
When you are finished, click Done.
If you made any changes, the Save Changes dialog box appears.
6.
If you want to save your changes, click Yes.
Modifying the Device Driver
B
B
B
B
B
B
B
B
B
95