Table of Contents
Advertisement
About this Manual
Conventions Used in this Manual
x
•
Chapter
3,
"Supported Device Driver Capabilities,"
capabilities supported by the DT3120 Device Driver and the
initialized control values.
•
Chapter
4,
"Programming Flowcharts,"
you must follow to program the DT3120 board using the
DT-Open Layers Frame Grabber SDK.
•
Chapter
5,
"Troubleshooting,"
use to resolve problems with the boards and the device driver,
should they occur.
•
Appendix
A,
"Specifications,"
boards.
•
Appendix
B,
"Modifying the Device Driver,"
add, modify, and remove boards from the device driver, and how
to uninstall the device driver, if necessary.
• An index complete this manual.
The following conventions are used in this manual:
• Notes provide useful information that requires special emphasis,
cautions provide information to help you avoid losing data or
damaging your equipment, and warnings provide information to
help you avoid catastrophic damage to yourself or your
equipment.
• Items that you select or type are shown in bold.
• Courier font is used to represent source code.
describes the processes
provides information that you can
lists the specifications of the
describes how to
describes the
Advertisement
Table of Contents
