Table of Contents
Advertisement
Appendix B
Uninstalling the Device Driver
96
Generally, you will always require the DT3120 Device Driver.
However, if you are no longer using the DT3120 with the supported
software, you can uninstall the DT3120 Device Driver from the
system by performing the following steps:
1.
Open the Control Panel, and double-click System.
2.
Click the Device Manager tab.
3.
Double-click DT Image Device.
4.
Click DT3120 Secondary Device, then click Remove.
The Confirm Device Removal dialog appears.
5.
Click OK to confirm the removal.
6.
Click DT3120 Frame Grabber, then click Remove.
The Confirm Device Removal dialog appears.
7.
Click OK to confirm the removal.
8.
Repeat steps 6 and 7 until all DT3120 frame grabber boards have
been removed.
Close the System dialog box.
9.
10. From the Control Panel, click Add/Remove Programs.
11. Click DT3120 Drivers for Windows 98 and Me, then click
Add/Remove.
12. Click Yes to remove read-only files.
13. Click Finish.
14. Close the Control Panel.
15. Turn your computer off and remove any DT3120 boards.
Note: If you want to reinstall the device driver after removing it,
refer to the DT3120 Getting Started Manual for instructions.
Advertisement
Table of Contents
