Advertisement
SETUP AND PROGRAMMING
EXAMPLE OF AN AUTOMATIC UNLOCK APPLICATION...Continued...
AG1 (USES ACCESS LEVELS 1 AND 2 )
THEN USE AG1 TO AUTO UNLOCK ENTR. 1 AND
ENTR. 2
These are shorter versions of the other tables in this manual. Start by defining which
entrance is to be unlocked, for how long, on which days. This is the time zone data. Next, define
which combinations of doors are controlled by a time zone. This is an access level. Last, group
access levels into an access group. The Entrance Group is that access group number.
TRANSACTION BUFFER INFORMATION
The transaction buffer stores any event that would normally create a logging printer message. For
examples of report messages, see below. The size of the transaction buffer depends on the capacity
of the TEC.
Usually, the smaller the capacity the larger the transaction buffer space. After a
transaction buffer becomes full, it begins to overwrite the oldest event in the transaction buffer storage
space.
VIEW LOG
Press "7" then "1" from the main menu to get the selections shown below. View Log will display the
Log one page at a time. Press "0" to stop and then "Enter" key to return to the Main menu
SEND LOG
(CAT Shown. TEC is similar.)
Pressing "2" will send all logging data. This allows the log
to be viewed from start to finish from the terminal. The log
will be shown non-stop .
CAUTION: No entry is accepted until the complete log is
sent.
Page 66
TEC Series v 3.2X
Access Levels
ACCESS
0
Always Active Always Active
1
X
X
2
Advertisement
Need help?
Do you have a question about the TEC Series and is the answer not in the manual?
Questions and answers
How to change a listed resident's phone number
To change a listed resident's phone number in the Select Engineered Systems TEC Series, you need the Manager's Password. The first three digits of the Program Password serve as the Manager's Password. Once you have access, follow these steps:
1. Enter the Communications Setup menu.
2. Use the Manager's Password to access the settings that allow phone number changes.
3. Locate the option to edit resident details, including phone numbers.
4. Input the new phone number.
5. Confirm the change by pressing the "Enter" key.
This updates the resident's phone number in the system.
This answer is automatically generated