Advertisement
TEC Series v 3.2X
SETTING TIME / DATE continued
Enter a 1 or 2 digit number to set the day of the month. If a
mistake is made, press "0" and "#" simultaneously to backspace
one character. After the day is entered, press the "*" key.
Enter a 1 or 2 digit number to set the month. If you make a
mistake, press "0" and "#" simultaneously to backspace one
character. After the month is entered, press the "*" key.
Enter a 2 digit number to set the year. If you make a mistake,
press "0" and "#" simultaneously to backspace one character.
After the year is entered, press the "*" key.
You will be returned to the Clock Setup menu.
SETTING TIME ZONES
this to control access to a facility, when a given condition is valid, based on:
1) The time of day.
2) The day of the week.
3) Whether or not the day of the week is a Holiday.
A time zone is valid only within a 24 hour period that begins at midnight. A time zone has a start time
and an ending time. This can be as short as two minutes, or as long as 24 hours. This time period is
valid in combinations from 1 to 7 days and Holidays. There are 8 time zones numbered 0 - 7
available for use on a TEC. Holidays may be set up at any time. A time zone can have valid
Holidays, or invalid Holidays. A time zone can be set that is only valid on Holidays, for applications
that require different hours of access on Holidays.
From the main menu, select "5" for clock setup, then "2" for time zone.
You will be prompted to select a time zone between 0 and 7. If you
make a mistake, press "0" and "#" simultaneously to backspace one
character. Once programming of a time zone is begun, all choices
must be keyed in or you will be returned to the beginning of the time
zone menu.
After the time zone is selected, press the "*" key. You will be
prompted to key in the hour. This is a 1 or 2 digit number. The hour
is expressed in 24 hour format (e.g., 2:25 P.M. is keyed in as 14:25),
from 00:00 to 23:59. If you make a mistake, press "0" and "#"
simultaneously to backspace one character. After the hour is
entered, press the "*" Key.
You will be prompted to key in the minute. This is a 1 or 2 digit
number between 00 and 59. If you make a mistake, press "0" and
"#" simultaneously to backspace one character. After the minute is
entered, press the "*" key.
Next, enter the ending hour. This is a 1 or 2 digit number. If you
make a mistake, press "0" and "#" simultaneously to backspace one
character. After the hour is entered, press the "*" key. Press "0" and
"#" simultaneously to backspace one character. After the end hour is
entered, press the "*" Key.
A time zone is a period of time that limits when the TEC is valid. Use
SETUP AND PROGRAMMING
00:00 00/00/00
DATE:
00:00 00/00/00
MONTH:
00:00 00/00/00
YEAR:
TIMEZONE <0-7>
START HOUR 00
START MIN 00
END HOUR 23
Page 39
Advertisement
Need help?
Do you have a question about the TEC Series and is the answer not in the manual?
Questions and answers
How to change a listed resident's phone number
To change a listed resident's phone number in the Select Engineered Systems TEC Series, you need the Manager's Password. The first three digits of the Program Password serve as the Manager's Password. Once you have access, follow these steps:
1. Enter the Communications Setup menu.
2. Use the Manager's Password to access the settings that allow phone number changes.
3. Locate the option to edit resident details, including phone numbers.
4. Input the new phone number.
5. Confirm the change by pressing the "Enter" key.
This updates the resident's phone number in the system.
This answer is automatically generated