Advertisement
SETUP AND PROGRAMMING
SETUP AND PROGRAMMING USING THE KEYPAD..
MANAGER PASSCODE
The first 3 digits of the 6 digit pass code are for programming main menu choice 1 (CODES/
NAMES) only. This is useful for on site maintenance of names and codes. This prevents the
system parameters and configuration from being inadvertently modified after installation.
On the following is an overview of the menu selections possible on a TEC.
PROGRAMMING CHOICES
MAIN MENU
1 = CODES / NAMES
1 = ADD / FIND NAME
2 = FIND NAME
3 = FIND PIN
4 = FIND CARD
5 = CODES USED
6 = SHOW ALL CODES
7 = SHOW ALL NAMES
8 = ENA ACC GRP = 1
2 = ENT. CONTROL
(ENT 1 CONFIG TO ENT 4 CONFIG)
SEL ENT 1 - 4
ENT X
1 = UNLOCK TIME
2 = UNLOCK TONE
3 = AUTO GROUP
4 = LATCH TONE
3 = SYS. PARAMETERS
1 = TALK TIME
2 = ALARM TIME
3 = CODE LENGTH
4 = PIN LENGTH
5 = BACK BEEP
6 = TONE DIAL
7 = RING COUNT (UNIT ID)
8 = STRIKE OUT
9 = TITLE PAGE
Page 28
TEC Series v 3.2X
FOLLOW MENU
1 -6 ALPHA NUMERIC
1-6 NUMERIC
1-5 NUMERIC
DISPLAYS # USED
CRT ONLY
CRT ONLY
ENABLES ACCESS GROUPS
FACTORY
DEFAULTS
SELECT ENTRANCE
1 -99 SECONDS
0 -9 T-TONE RECV'D
0 -7
0 - 9 T-TONE RECV'D
1 -99 MINUTES
1 -99 SECONDS
1 -6 DIR LENGTH
0 -6 PIN LENGTH
0-1, (1 = ENABLE)
0-1, (1 = T-TONE DIAL)
0 -9 RING COUNT
0-1, (1 = ENABLE)
10
6
0
0
01
10
3
4
0
1
3
0
Advertisement
Need help?
Do you have a question about the TEC Series and is the answer not in the manual?
Questions and answers
How to change a listed resident's phone number
To change a listed resident's phone number in the Select Engineered Systems TEC Series, you need the Manager's Password. The first three digits of the Program Password serve as the Manager's Password. Once you have access, follow these steps:
1. Enter the Communications Setup menu.
2. Use the Manager's Password to access the settings that allow phone number changes.
3. Locate the option to edit resident details, including phone numbers.
4. Input the new phone number.
5. Confirm the change by pressing the "Enter" key.
This updates the resident's phone number in the system.
This answer is automatically generated