Advertisement
SETUP AND PROGRAMMING
SYSTEM PARAMETERS
ACCESS LEVELS continued
Use the table below to help keep track of which Access Levels are required for this installation.
Writing them down in the table provided will help reduce programming entry errors.
ACCESS TIME
0
1
2
3
4
5
6
7
AUTOMATIC UNLOCK AND RELOCK BY TIME ZONE
The example on the next page shows how a business might keep two entrances open during
peak employee traffic, and secure those two entrances at all other times. Time Zone 1 is valid for one
half hour in the morning, Monday through Friday. Time Zone 2 is valid for one half hour in the
afternoon, Monday through Friday. Time Zone 0 is valid all the time, except Holidays.
Each Time Zone is assigned to a different Access Level. Both entrances are selected in the
Access Levels. The morning and the afternoon Access Levels are grouped together in Access Group
1.
By setting Entrance Group 1 to Access Group 1, the entrance will automatically unlock during
peak traffic, and relock at all other times. Employees whose PIN codes or cards are set to Access
Level 0, can open the entrance at all other times. If employees try to use their PIN code or Card while
the entrances are unlocked, the display on the TEC will show "OPEN".
Page 44
ENTRANCE
TEC Series v 3.2X
Advertisement
Need help?
Do you have a question about the TEC Series and is the answer not in the manual?
Questions and answers
How to change a listed resident's phone number
To change a listed resident's phone number in the Select Engineered Systems TEC Series, you need the Manager's Password. The first three digits of the Program Password serve as the Manager's Password. Once you have access, follow these steps:
1. Enter the Communications Setup menu.
2. Use the Manager's Password to access the settings that allow phone number changes.
3. Locate the option to edit resident details, including phone numbers.
4. Input the new phone number.
5. Confirm the change by pressing the "Enter" key.
This updates the resident's phone number in the system.
This answer is automatically generated