Advertisement
TEC Series v 3.2X
CODES / NAMES
ADD / FIND NAME
To delete a code number, key in the code number then press the "DEL" (delete key) followed by the
"Enter" key.
To delete a part of a code number, such as a phone number, PIN # or card #, go to that field by
pressing the "Enter". When you reach the desired field, key in "0", and then the "Enter" key. This will
delete the data in that field, but not any of the other fields associated with the code number.
IF YOU TYPE ANY CHARACTER, IN THE FIRST POSITION OF A NAME FIELD, IT WILL
DELETE ALL DATA ASSOCIATED WITH THAT CODE NUMBER.
PHONE # =: You will be prompted for the phone number. Enter the numbers normally. For this
field, letters are not possible. Press the ":" key to generate a 3 second pause.
HIDE NAME FEATURE: Place a pause as the first item in the phone number (ex. :5551212). The
name will not display in the directory, but anyone who dials the code number will still be able to
reach the resident. It is not necessary to enter phone numbers in a TECCard but it is allowed for
convenience.
PIN =: You will be prompted to enter a PIN. A PIN is a Personal Identification Number. This will
allow anyone who knows this number to use the PIN entrance by entering a "*" and this PIN code.
Each name may have a PIN code. The PIN code length is from one to six digits, depending on
what you selected from the system parameters menu All PIN codes must be the same length as
what was selected from the system parameters menu. Enter the PIN code, and then the "Enter" to
place the PIN code into memory. If you disable the PIN (PIN length = 0), this choice will not
display.
(CAT Shown. TEC is similar.)
Pressing "1" (after entering the password) will show the
choice at left.
This shows after Pressing "1" on the Codes/
Names menu. You will be prompted for the
code as shown at left:
(CAT Shown. TEC is similar.)
Page 53
Advertisement
Need help?
Do you have a question about the TEC Series and is the answer not in the manual?
Questions and answers
How to change a listed resident's phone number
To change a listed resident's phone number in the Select Engineered Systems TEC Series, you need the Manager's Password. The first three digits of the Program Password serve as the Manager's Password. Once you have access, follow these steps:
1. Enter the Communications Setup menu.
2. Use the Manager's Password to access the settings that allow phone number changes.
3. Locate the option to edit resident details, including phone numbers.
4. Input the new phone number.
5. Confirm the change by pressing the "Enter" key.
This updates the resident's phone number in the system.
This answer is automatically generated