Lexmark CS317 User Manual page 135

Troubleshooting
Remove packaging material, check all
1
Remove any remaining packing material from the specified location.
2
From the printer control panel, press
Remove paper from standard output bin
Remove the paper stack from the standard bin.
Replace maintenance kit [80.xy]
The printer is scheduled for maintenance. For more information, go to
contact your service representative, and then report the message.
Replace missing [color] cartridge [31.xy]
Install the indicated toner cartridge to clear the message. For more information, see the "Replacing supplies"
section of the User's Guide.
Replace missing [type] imaging kit [31.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Install the indicated imaging kit to clear the message. For more information, see the "Replacing supplies"
section of the User's Guide.
Replace missing waste toner bottle [31.xyz]
Install the missing waste toner bottle to clear the message. For more information, see the instruction sheet
that came with the supply.
Replace [type] imaging kit, 0 estimated pages remain [84.xy]
Note: The type can be a black imaging kit, or a black and color imaging kit.
Replace the indicated imaging kit to clear the message and continue printing. For more information, see
the instruction sheet that came with the supply.
Note: If you do not have a replacement imaging kit, then see the "Ordering supplies" section of the
User's Guide or visit www.lexmark.com.
Replace unsupported [color] cartridge [32.xy]
Remove the toner cartridge, and then install a supported one to clear the message.
Note: If you do not have a replacement cartridge, then see the "Ordering supplies" section of the User's
Guide or visit www.lexmark.com.
to clear the message and continue printing.
http://support.lexmark.com
135
or