Table of Contents
Advertisement
Printing
Using Max Speed and Max Yield
Max Speed and Max Yield let you choose between a faster print speed and a higher toner yield.
•
Max Speed—This lets you print in either black or color depending on what is set in the printer driver. The
printer prints in color unless Black Only is selected in the printer driver.
•
Max Yield—This lets you switch from black to color based on the color content found on each page. This
is the factory default setting. Frequent color mode switching can result to slower printing if the content of
pages is mixed.
Using the Embedded Web Server
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address in the TCP/IP section in the Network/Ports menu. The IP address appears
as four sets of numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Settings > Print Settings > Setup Menu.
3
From the Printer Usage list, select Max Speed or Max Yield.
4
Click Submit.
Using the printer control panel
1
From the printer control panel, navigate to:
> Settings >
2
From the Printer Usage list, select Max Speed or Max Yield.
3
Press
.
Printing information pages
For more information on printing information pages, see
"Printing a network setup page" on page
Printing a font sample list
From the printer control panel, navigate to either of the following:
> Reports >
> Print Fonts >
or
> Reports >
> Print Fonts >
> Print Settings >
24.
> PCL Fonts >
> PostScript Fonts >
> Setup Menu >
"Printing a menu settings page" on page 24
47
and
Advertisement
Table of Contents
