Lexmark CS317 User Manual page 80

Understanding the printer menus
Use
Manual Color (continued)
CMYK Image
CMYK Text
CMYK Graphics
Spot Color Replacement
Color Adjust
Utilities menu
Use
Activate Hex Trace
Coverage Estimator
Off
On
To
Customize the CMYK color conversions.
Select from the following options:
US CMYK
Euro CMYK
Vivid CMYK
Off
Notes:
•
US CMYK is the factory default setting. This applies a color conversion table
that tries to produce output that matches SWOP color output.
•
Euro CMYK is the international factory default setting. This applies a color
conversion table that tries to produce output that matches Euroscale color
output.
•
Vivid CMYK increases color saturation for the US conversion table.
•
Off turns off color conversion.
Assign specific CMYK values to named spot colors.
Note: This menu is available only in the Embedded Web Server.
Initiate a recalibration of color conversion tables and allow the printer to make
adjustments for color variations in output.
Notes:
• Adjusting color starts when the menu is selected. Adjusting color
appears on the display until the process is finished.
•
Color variations in output sometimes result from changeable conditions
such as room temperature and humidity. Color adjustments are made on
printer algorithms. Color alignment is also recalibrated in this process.
To
Assist in isolating the source of a print job problem.
Notes:
•
When activated, all data sent to the printer is printed in hexadecimal and
character representation, and control codes are not executed.
•
To exit or deactivate Hex Trace, turn off or reset the printer.
Provide an estimate of the percentage coverage of toner on a page. The
estimate is printed on a separate page at the end of each print job.
Note: Off is the factory default setting.
80