Lexmark CS317 User Manual page 165

Troubleshooting
Transparency print quality is poor
Action
Step 1
From the printer control panel, set the paper type in the Paper
menu to match the paper loaded in the tray.
Is the paper type for the tray set to Transparency?
Step 2
a
Check if you are using a recommended type of transparency.
b
Resend the print job.
Is the print quality still poor?
Uneven print density
Action
Replace the imaging kit, and then resend the print job.
Is the print density uneven?
Vertical voids appear on prints
Leading edge
Trailing edge
Action
Step 1
a
Check if your software program is using a correct fill pattern.
b
Resend the print job.
Do vertical voids appear on prints?
Yes No
Go to step 2. Set the paper type to
Transparency.
Contact customer The problem is
support. solved.
Yes No
Contact customer The problem is
support. solved.
Yes No
Go to step 2. The problem is
solved.
165